CRANKSHAFT ASSEM. 9S2003 - Caterpillar

9S2003 CRANKSHAFT ASSEM. Caterpillar parts 992, D348

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA9S2003
9S-2003
9S2003

Buy CRANKSHAFT ASSEM. 9S2003 Caterpillar genuine, new aftermarket tractor parts with delivery
MARINE ENGINE, WHEEL LOADER,

Compatible equipment models: 9S2003:

MARINE ENGINE D348

VEHICULAR ENGINE

WHEEL LOADER 992 Caterpillar

Number on catalog scheme: 1

Caterpillar 9S2003 Parts scheme CRANKSHAFT ASSEM.

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - LOCTITE 5900 Flange Sealant 1
Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct draining and filling procedures.
Illustration 1 g03687833
Remove engine oil level sensor (3). Remove tube assembly (4).
Remove bolts (2). Remove engine oil pan (1). Note: Note the position of engine oil pan cover (1) for reinstallation.Installation Procedure
Install engine oil pan (1) in the reverse order of removal. Note: Make sure that all surfaces are free of containments. Trim excess gasket material from the gasket engine oil pan assembly (1).
Illustration 2 g02750956
Apply Tooling (A) to Locations (X) and over the ball and socket joints of gasket (4). Note: Illustration 2 shows the tightening sequence for bolts (2). The directional arrow is pointing towards the front housing.
Tighten bolts (2) using the above sequence to a torque of 47 9 N m (35 7 lb ft).
Tighten bolts (2) again using the above sequence to a torque of 47 9 N m (35 7 lb ft).
Tighten engine oil level sensor (3) to a torque of 25 1 N m (221 9 lb in).