CRIMP TOOL 4C4075 - Caterpillar

Illustration 1 g03396714
(1) Machine Product Identification Number (PIN) PlateProduct Identification Number (PIN)
Illustration 2 g02790701PIN plate (1) is mounted on the front frame near the articulation joint on the left-hand side of the machine.Record the information that is given on the product identification number plate (when applicable).Model Number (5)____________________Machine PIN (6)____________________Bar Code (7)CE Plate (8)____________________Month and Year of Manufacture Plate (If Required) (9)____________________Country of Origin (10)____________________Facility of Manufacture (11)____________________Local regulation may require documentation of the Month and/or Year of Manufacture in the OMM. Comply with these regulations.Propulsion Motor Serial Number Plate (2)
The propulsion motor serial number plate (2) is located on the side of the propulsion housing. This plate is visible from the left-hand side of the machine.Record the information that is given on the propulsion motor serial number plate.Propulsion Motor Serial Number____________________Propulsion Motor Arrangement Number____________________Converter Serial Number____________________Generator Serial Number Plate (3)
The generator serial number plate is located on the top of the generator housing.Record the information that is given on the generator serial number plate.Generator Serial Number____________________Generator Arrangement Number____________________Power Inverter Serial Number Plate (4)
The power inverter serial number plate is located on top of the power inverter on the left-hand side of the machine.Record the information that is given on the power inverter serial number plate.Power Inverter Serial Number____________________Engine Serial Number Plate (12)
The engine serial number plate is located near the starter at the rear of the engine block on the left-hand side of the machine.Record the information that is given on the engine serial number plate.Engine Model Number____________________Engine Serial Number____________________Engine Arrangement Number____________________European Union
Note: The CE plate is on machines that are certified to the valid European Union requirements at that time.If the machine is equipped with the plate for the European Union, this plate will be attached to the PIN plate. The CE plate is positioned on the bottom left side of the plate for the PIN.For machines compliant to "2006/42/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces provided below.
Illustration 3 g01883459
Engine Power primary engine (kW)____________________
Engine Power for additional engine if equipped (kW)____________________
Typical machine operating weight for European market (kg)____________________
Year of construction____________________
Machine Type____________________For the name, the address and the country of origin for the manufacturer, see the PIN plate.For machines compliant to "1998/37/EC", the following information is stamped onto the CE plate. For quick reference, record this information in the spaces provided below.
Illustration 4 g01062968
Engine Power primary engine (kW)____________________
Typical machine operating weight for European market (kg)____________________
Year ____________________Electromagnetic Emissions
Note: This label is on machines that are going into Canada.
Illustration 5 g06063443If equipped, this label is located next to the Pin plate. This label verifies that the product meets the requirements of ICES-002 Issue 6. Compliance to ICES-002 Issue 6 is accomplished by meeting electromagnetic emissions industry standard CISPR-12.Certification
Sound
Illustration 6 g00933634
Typical example
If equipped, the film is used to verify the environmental sound certification of the machine. The value that is listed on the film indicates the guaranteed sound level. The guaranteed sound level is measured at the time of manufacture. Refer to Operation and