CROSS & BRG 0641152 - Caterpillar

Table 1
Parts that are Required in order to Install 175-0008 Gear Pump    
Item     Qty     Part Number     Description    
6     2     1P-3705     Rectangular Seal    
10     1     175-0008     Gear Pump    
11     1     5F-3106     O-Ring Seal    
12     1     0DE5264     Hose Assembly    ProcedureNote: You must remove the Electronic Control Module (ECM) before you can install the 175-0008 Gear Pump .
Illustration 1 g00828039
Location of the Electronic Control Module (ECM) (1) Electronic Control Module
Remove the Electronic Control Module (ECM) (1) .
Illustration 2 g00828040
View of the mounting for the 3G-1710 Gear Pump (2) 0DE3311 Hose Assembly (3) 9EL1974 Adapter (4) 6G-0584 Elbow (5) 3G-1710 Gear Pump
Remove 3G-1710 Gear Pump (5). Refer to the reference that is shown above.
Remove 0DE3311 Hose Assembly (2). Discard 0DE3311 Hose Assembly (2) .
Remove 6G-0584 Elbow (4) and adapter (3). Discard 6G-0584 Elbow (4) and adapter (3) .
Illustration 3 g00828041
View of the mounting for the 175-0008 Gear Pump (6) 1P-3705 Rectangular Seal (7) 7X-0347 Bolt (8) 8T-4122 Hard Washer (9) 5P-8077 Half Flange (10) 175-0008 Gear Pump (11) 5F-3106 O-Ring Seal (12) 0DE5264 Hose Assembly
Install 175-0008 Gear Pump (10). Refer to the reference that is shown above.
Install 0DE5264 Hose Assembly (12). Refer to Illustration 3.
Reinstall the Electronic Control Module (ECM) that was removed in Step 1.