AVSPARE.COM
parts catalog

CROSS AS-ORFS 2501428 - Caterpillar



2501428 CROSS AS-ORFS Caterpillar parts CROSS
Rating:
41
Alternative (cross code) number:
CA2501428
250-1428
2501428
Caterpillar 2501428 CROSS AS-ORFS

Buy CROSS AS-ORFS 2501428 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 20 g03888406
View of area (D)
Locate plate assembly (19) 42 mm (1.7 inch) from channel (25), and 30 mm (1.2 inch) from plate (26).
Mark the position of plate assembly (19) on the truck body. Remove the plate assembly.
Prepare the area of plate assembly (19) for welding. For the proper procedure, refer to the information in Special Instruction, REHS1841.
Position plate assembly (19) on the machine. Use the information in Illustration 19 to weld the plate assembly to the truck body.
Illustration 21 g03888444
Use two bolts (1), and two washers (2) to bolt plate assembly (11) to plate assembly (19).
Use plate assembly (11) to mark the location of the following parts on the truck body.
Two plate assemblies (3) on the right side of plate assembly (11)
One plate assembly (4) on the right side of plate assembly (11)
One plate assembly (10) on the left side of plate assembly (11)
Disassemble plate assembly (11) from plate assembly (19).
Prepare the four plate assembly areas for welding. For the proper procedure, refer to the information in Special Instruction, REHS1841.
Assemble plate assembly (11) to plate assembly (19).
Illustration 22 g03888472
Use the information in Illustration 22 to weld the three parts to the right sided of plate assembly (11).
Illustration 23 g03888506
View (A-A)
Apply tack weld (27) to the bottom of plate assembly (10) to secure the plate assembly to the truck body.
Illustration 24 g03888545
Remove plate assembly (11) from the truck body.
Use the information in Illustration 24 to weld plate assembly (10) to the truck body.
Illustration 25 g03888563
Use two bolts (1), and two washers (2) to bolt plate assembly (13) to plate assembly (19).
Use plate assembly (13) to mark the location of the following parts on the truck body.
Three plate assemblies (4)
One plate assembly (12)
Remove plate assembly (13) from the truck body.
Prepare the positions of the three plate assemblies (4), and one plate assembly (12) for welding. For the proper procedure, refer to the information in Special Instruction, REHS1841.
Illustration 26 g03888584
Install plate assembly (13) to the truck body.
Use the information in Illustration 26 to weld the four plate assemblies to the truck body.
Illustration 27 g03888630
Use plate assembly (13) to locate the position of plate (18). Mark the location of the plate on the truck body.
Remove plate assembly (13) and plate (18) from the truck body. Prepare the area of plate (18) for welding. For the proper procedure, refer to the information in Special Instruction, REHS1841.
Install plate assembly (13), and plate (18) to the truck body. Apply tack weld (28) to plate (18) on the end toward the outside of the truck.
Illustration 28 g03888658
Remove plate assembly (13) from the truck body. Use the information in Illustration28 to weld plate (18) to the truck body.
Illustration 29 g03888722
Retrieve the sound suppression material (C), bolts, (A), and washers (B) that were saved in Step 1. Position the sound suppression material over the bosses on the truck body. Use the bosses as guides to locate the sound suppression material. Use one bolt, and one washer at each boss to retain the sound suppression material. Do not install the bolts and washers at this time.
Illustration 30 g03888747
A view


Parts cross Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.