CROSSMEMBER 5C6876 - Caterpillar

Table 1
Lubricant Viscosities for Ambient Temperatures    
Compartment or System    Oil Type and Classification    Oil Viscosities    °C    °F    
Min Max    Min    Max    
Engine Crankcase for all Machines (1) (2)
and Drive Chain Boxes     Cat DEO Multigrade
Cat DEO SYN
Cat Arctic DEO SYN (3)
Cat ECF-1 (4)
API CG-4 Multigrade (5)     SAE 0W-20     -40     10     -40     50    
SAE 0W-30 -40 30     -40     86    
SAE 0W-40 -40 40     -40     104    
SAE 5W-30 -30 30     -22     86    
SAE 5W-40 -30 50     -22     122    
SAE 10W-30 (6) -18 40     0     104    
SAE 10W-40 -18 50     0     122    
SAE 15W-40 -9.5 50     15     122    
Hydraulic Systems,
Hydrostatic Transmission     Cat HYDO
Cat DEO
Cat MTO
Cat TDTO
Cat TDTO-TMS
Cat DEO SYN
Cat Arctic DEO SYN
Cat Arctic TDTO
Cat ECF-1
Cat BIO HYDO (HEES)
API CG-4
API CF
commercial TO-4
commercial BF-1     SAE 0W-20     -40     40     -40     104    
SAE 0W-30 -40 40     -40     104    
SAE 0W-40 -40 40     -40     104    
SAE 5W-30 -30 40     -22     104    
SAE 5W-40 -30 40     -22     104    
SAE 10W -20 40     -4     104    
SAE 30 10 50     50     122    
SAE 10W-30 -20 40     -4     104    
SAE 15W-40 -15 50     5     122    
Cat MTO -25 40     -13     104    
Cat BIO HYDO (HEES) -40 43     -40     110    
Cat TDTO-TMS -20 50     -4     122    
External Lubrication Points     Advanced 3Moly     NLGI Grade 2     -20     40     -4     104    
( 1 ) Supplemental heat is recommended for cold-soaked starts below the minimum ambient temperature. Supplemental heat may be required for cold-soaked starts that are above the minimum temperature that is stated, depending on the parasitic load and other factors. Cold-soaked starts occur when the engine has not been operated for a period of time, allowing the oil to become more viscous due to cooler ambient temperatures.
( 2 ) API CF oils are not recommended for Caterpillar 3500 Series and smaller Direct Injection (DI) diesel engines. API CF-4 oils are not recommended for Caterpillar machine diesel engines.
( 3 ) Cat Arctic DEO SYN is an SAE 0W-30 viscosity grade oil.
( 4 ) API CI-4, API CI-4 PLUS, and API CH-4 oils are acceptable if the requirements of Caterpillar's ECF-1 (Engine Crankcase Fluid specification - 1) are met. API CI-4, API CI-4 PLUS, and API CH-4 oils that have not met the requirements of Caterpillar's ECF-1 specification may cause reduced engine life.
( 5 ) API CG-4 oils are acceptable for use in all Caterpillar machine diesel engines. When API CG-4 oils are used, the oil change interval should not exceed 250 hours. API CG-4 oils that also meet API CI-4, API CI-4