10R2000 CROWN AS-PISTON Caterpillar parts
C-15
Rating:
Alternative (cross code) number:
CA10R2000
10R-2000
10R2000
CA10R2000
10R-2000
10R2000
TRUCK ENGINE,
Compatible equipment models: 10R2000:
Information:
Removal Procedure
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Drain the coolant. Refer to Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Illustration 1 g06221639
Open door assembly (1).
Illustration 2 g06221640
Remove bolts (2).
Illustration 3 g06221641
Loosen bolts (5), remove bolts (4), and remove panel assembly (3).
Illustration 4 g06191472
Loosen clamps (7) and disconnect hose (6).
Remove bolts (9), water temperature regulator housing (8), and the gasket.
Remove the water temperature regulator.Installation Procedure
Install the water temperature regulator in the reverse order of removal.
Personal injury can result from hot coolant, steam and alkali.At operating temperature, engine coolant is hot and under pressure. The radiator and all lines to heaters or the engine contain hot coolant or steam. Any contact can cause severe burns.Remove cooling system pressure cap slowly to relieve pressure only when engine is stopped and cooling system pressure cap is cool enough to touch with your bare hand.Do not attempt to tighten hose connections when the coolant is hot, the hose can come off causing burns.Cooling System Coolant Additive contains alkali. Avoid contact with skin and eyes.
Drain the coolant. Refer to Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Illustration 1 g06221639
Open door assembly (1).
Illustration 2 g06221640
Remove bolts (2).
Illustration 3 g06221641
Loosen bolts (5), remove bolts (4), and remove panel assembly (3).
Illustration 4 g06191472
Loosen clamps (7) and disconnect hose (6).
Remove bolts (9), water temperature regulator housing (8), and the gasket.
Remove the water temperature regulator.Installation Procedure
Install the water temperature regulator in the reverse order of removal.
Caterpillar parts catalog:
Parts crown Caterpillar catalog:
1979320
CROWN AS-PISTON
3126E
3126E
2173435
CROWN AS
C-12
C-12
2168569
CROWN AS
C-12
C-12
1979374
CROWN AS
C-12
C-12
1979358
CROWN AS
C-10
C-10