parts catalog

CUP 0005454 - Caterpillar

0005454 CUP Caterpillar parts CUP
Alternative (cross code) number:
Caterpillar 0005454 CUP
Weight: 0.010 pounds 0 kg.

Buy CUP 0005454 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A (1)     218-8171     Bolt     1    
( 1 ) Part of 218-8172 Fuel Transfer Pump and Mounting Gp
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean the components and the mating surfaces.
Illustration 1 g01032028
Position fuel transfer pump (4) on unit injector hydraulic pump (1). Be sure to align the drive tang of the fuel transfer pump to the drive slot in the end of the pump shaft.
Install bolts (3). Lightly tighten the bolts at this time.
Remove Tooling (A) and install bolt (2). Lightly tighten the bolt at this time.
Install mounting bolts (5) for fuel transfer pump (4). Lightly tighten the bolts at this time.
Tighten bolt (2) and bolts (3) evenly to a torque of 28 2 N m (21 1 lb ft).
Tighten bolt (2) and bolts (3) again to a torque of 28 2 N m (21 1 lb ft).
Tighten bolts (5) to a torque of 8.0 0.4 N m (71 4 lb in).End By: Install the unit injector hydraulic pump. Refer to Disassembly and Assembly, "Unit Injector Hydraulic Pump - Install".

Parts cup Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.