CUP 0622722 - Caterpillar

Illustration 13 g00488784
Rod end (41) will need adjustment in order to position the radiator. The radiator should be perpendicular to the machine frame. After the adjustment is made nut (40) must be tightened.
Illustration 14 g00488367
Position fan guards (28) and (30) to radiator (5) . Install bolts (32) and (33) that secure fan guards (28) and (30) to radiator (5) .
Illustration 15 g00488366
Install bolt (31) that secures fan guard (30) to radiator (5) .
Illustration 16 g00488365
Install bolt (29) that secures fan guard (28) to radiator (5) .
Illustration 17 g00488364
Install two bolts (27) that secure the fan guards to radiator (5) .
Illustration 18 g00488363
Position pipe (22) and hose (25) as a unit to the machine. Connect hose (25) to radiator (5) . Install band clamp (26) in order to secure hose (25) to the radiator.
Illustration 19 g00488362
Install pipe (22) in hose (24) . Install band clamp (23) in order to secure pipe (22) in hose (24) . Connect hose (21) to pipe (22) .
Illustration 20 g00488361
Connect hose (19) to pipe (18) . Install band clamp (20) in order to secure hose (19) on pipe (18) .
Illustration 21 g00488360
Install hose (17) to pipe (16) and pipe (18) . Tighten two band clamps (15) in order to secure hose (17) to pipe (16) and pipe (18) .
Illustration 22 g00488339
Position hose (7) to the radiator shroud. Install bolt (13) and hose clamp (14) in order to secure hose (7) to the radiator shroud.
Illustration 23 g00488338
Position ether aid control (9) to the radiator shroud. Install two bolts (8) in order to secure ether aid control (9) to the radiator shroud. Install two bolts (10) , the wire clips and the wires to the radiator shroud.
Install retaining nut (11) in order to connect ether hose (12) to ether aid control (9) .
Illustration 24 g00488337
Install retaining nut (6) in order to connect hose (7) to radiator (5) .
Illustration 25 g00488336
Position drain hose (3) to drain valve (1) and bottom plate (4) . Tighten band clamp (2) in order to secure drain hose (3) to drain valve (1) .
Fill the radiator with coolant. Refer to Operation and Maintenance Manual, SEBU7028 for the proper procedure.End By:
Install the refrigerant condenser. Refer to Disassembly and Assembly, " Refrigerant Condenser- Remove and Install". The information is in this manual.
Install the engine hood. Refer to Disassembly and Assembly, "Hood - Remove and Install". The information is in this manual.