CUP-BEARING 2A4576 - Caterpillar

Integrated Control Head (ICH)
Illustration 1 g00918416
Integrated Control Head
Illustration 2 g00918449The integrated control head (ICH) provides inputs to the PCP to generate the control signals for the engine and control of the transmission gear by using a data link for each engine. The ICH also provides the operator with input switches for the following functions:
Activation of a station
Synchronization of engine throttles
Slow vessel mode
Activation of the trolling mode
Gear lockout controlThe integrated control head provides a visual indication of the status of the switch.Slim Line Control Head
Illustration 3 g00918420
Slim Line Control Head
The slim line control head will send signals to the Control Station Processor to indicate the position of the handles. The CSP converts theses signal into data link message sent to the PCP. The slim line control head is available as a single lever control or a dual lever control. The dual lever control head has the engine throttle and control for the marine gear on one lever. The single lever control has the engine throttle and control for the marine gear on separate levers.Switches for operator input for the following functions are provided on a separate button panel:
Activation of a station
Synchronization of engine throttles
Activation of the trolling mode
Gear lockout controlThe slim line control head does not contain any digital electronics. The slim line control head must be connected to a control station processor (CSP) in order to interface with the power train control processor (PCP).
Illustration 4 g00918426
Throttle range for the slim line control head
Illustration 5 g00918428
Gear positions for the slim line control head
Single Point Control Head
Illustration 6 g01037526The single point control head will control the engine throttle and the selection of the transmission gear. The single point control head is available as a single lever control. The single point control head has the engine throttle and control for the marine gear on one lever.Switches for operator input for the following functions are provided on a separate button panel:
Activation of a station
Synchronization of engine throttles
Activation of the trolling mode
Gear lockout controlThe single point control head does not contain any digital electronics. The single point control head must be connected to a control station processor (CSP) in order to interface with the power train control processor (PCP).Side Mount Control Head
Illustration 7 g01036769The side mount control head will send signals to the Control Station Processor to indicate the position of the handles. The CSP converts theses signal into data link message sent to the PCP. The side mount control head is available as a dual lever control. The dual lever control head has the engine throttle and control for the marine gear on one lever.Switches for operator input for the following functions are provided on a separate button panel:
Activation of a station
Synchronization of engine throttles
Activation of the trolling mode
Gear lockout controlThe side mount control head does not contain any digital electronics. The side mount control head must be connected to a control station processor (CSP) in order to interface with the power train control processor (PCP).Button Panel
Illustration 8 g00918436
Button Panel
(1) Indicator for "station active"
(2) Button for "station active"
(3) Button for