CUP 4M1898 - Caterpillar

Illustration 1 g03032117
Table 1
Specification for 210-7753 Exhaust Manifold Gp
Item Qty Part Specification Description
Before assembly, apply Loctite nickel anti seize to the washer surface and to the threads of the bolts.
1 8 162-6466 Bolt Torque to 240 40 N m (177 30 lb ft).
2 64 9L-7373 High Temperature Bolt Use the following procedure in order to tighten the bolts:
1. Torque the bolts to 55 5 N m (41 4 lb ft).
2. Again, tighten the bolts to 55 5 N m (41 4 lb ft).
3 16 200-6554 Bellows As Install bellows assemblies with the flow direction, as shown in the Illustration 1.
Allowable offset for the bellows assemblies from the center of the casting inner diameter is 1.5 mm (0.06 inch).
4 4 9X-2068 High Temperature Bolt Torque to 50 10 N m (37 7 lb ft).
5 38 437-7470 Bolt Use the following procedure in order to tighten the clamps:
1. Torque the clamp bolts to 25 6 N m (221 53 lb in).
2. Lightly tap around the clamps.
2. Again, tighten the clamp bolts to 25 6 N m (221 53 lb in).
6 4 7L-6443 High Temperature Bolt Torque to 50 10 N m (37 7 lb ft).