5D7449 CUP-BEARING Caterpillar parts
235D, 245, 245B, 245D, 2864C, 3408, 3408C, 3408E, 3412, 3412C, 3412E, 3508, 3512, 3516, 525B, 525C, 535B, 535C, 535D, 545, 545C, 545D, 555D, 561D, 571G, 572G, 586C, 637, 637B, 637D, 637E, 637G, 639D, ...
Rating:
Alternative (cross code) number:
CA5D7449
5D-7449
5D7449
CA5D7449
5D-7449
5D7449
Weight: 3 pounds 1 kg.
BRUSH CUTTER, WHEEL TRACTOR,
Related part:
5D7449
RACE-BEARING-YM
4162161
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 5D7449 Tapered Roller Cup Bearing
CTP Tapered Roller Cup Bearing Only || Sold in each || Easy in-and-out fit
CTP Tapered Roller Cup Bearing Only || Sold in each || Easy in-and-out fit
This part in 5 request:
Show.
This information for suppliers only!
2024-12-09
2024-09-20
2023-05-02
2022-06-14
2019-10-25
Number on catalog scheme:
16
For full view, you need register
Compatible equipment models: 5D7449:
Information:
Disassembly Procedure
Table 1
Required Tools
Tooling Part Number Part Description Qty
A 1P-0510 Driver Group 1 Start By:
Separate the governor and governor drive. Refer to Disassembly and Assembly, "Governor and Governor Drive - Separate" for the engine that is being serviced. Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01002173
Remove locknut (2). Turn bolt (1) counterclockwise for one turn.
Illustration 2 g01002174
Place the governor drive on wood blocks. Use a brass punch and a hammer and tap bolt (1) in order to loosen gear (3) from shaft (5).
Install a 5/16"-18 NC jam nut on bolt (4) even with the end of bolt (4). Use a brass punch and a hammer in order to loosen bolt (4) from the lever.
Remove bolt (1), the washer, the jam nut, and bolt (4).
Remove gear (3) and shaft (5).
Illustration 3 g01002175
Remove the lever and shaft assembly (7). Remove lever (8) and shaft (6).
Illustration 4 g01002176
Inspect bearing (9) for wear and damage. Replace bearing (9), if necessary. Use Tooling (A) in order to remove bearing (9), if necessary.
Inspect seal (10) for wear and damage. If a replacement seal is needed, you must destroy the seal in order to remove the seal.
Inspect bearings (11) for wear and damage. If replacement bearings are needed, use Tooling (A) in order to remove bearings (11).
Table 1
Required Tools
Tooling Part Number Part Description Qty
A 1P-0510 Driver Group 1 Start By:
Separate the governor and governor drive. Refer to Disassembly and Assembly, "Governor and Governor Drive - Separate" for the engine that is being serviced. Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01002173
Remove locknut (2). Turn bolt (1) counterclockwise for one turn.
Illustration 2 g01002174
Place the governor drive on wood blocks. Use a brass punch and a hammer and tap bolt (1) in order to loosen gear (3) from shaft (5).
Install a 5/16"-18 NC jam nut on bolt (4) even with the end of bolt (4). Use a brass punch and a hammer in order to loosen bolt (4) from the lever.
Remove bolt (1), the washer, the jam nut, and bolt (4).
Remove gear (3) and shaft (5).
Illustration 3 g01002175
Remove the lever and shaft assembly (7). Remove lever (8) and shaft (6).
Illustration 4 g01002176
Inspect bearing (9) for wear and damage. Replace bearing (9), if necessary. Use Tooling (A) in order to remove bearing (9), if necessary.
Inspect seal (10) for wear and damage. If a replacement seal is needed, you must destroy the seal in order to remove the seal.
Inspect bearings (11) for wear and damage. If replacement bearings are needed, use Tooling (A) in order to remove bearings (11).
Cat SIS web machinery list:
Parts cup Caterpillar catalog:
16G, 16H, 16H NA, 16M, 24H, 24M, 824C, 824H, 824K, 825H, 825K, 826C, 826H, 826K, 834B, 980C, 980F, 980F II, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M, 988B, 988F II, 993K, AD40, AE40, D44B, D550...
844, 844H, 844K, 854G, 854K, 990 II, 990H, 990K, 992G, 992K
120, 120B, 12E, 12F, 140B, 14E, 950B, 950B/950E, D25C, D30C, D350C, D35C, D35HP, D400, D7G, D7G2
990, 990 II, CB-44B, CB-534D, CB-54B, CD-54, CD-54B
990, 990 II, RR-250
990, 990 II
574, 824B, 988
769C, 769D, 771C, 771D, 772, 773, 773B, 773D, 775B, 775D, 776, 776C, 776D, 777, 777B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C
776C, 777B, 785, 785B, 789
776C, 776D, 777, 777B, 777D, 777F, 777G
776, 776C, 776D, 777, 777B, 777D, 777F, 777G, W330B
772, 772B, 773B, 773D, 773E, 773F, 773G, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G, 775G LRC, 775G OEM, 776, 776C, 777, 784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 789D
3406, 3406B, 3408, 631E, 631G, 637E, 637G, 651E, 657G, 844, 844H, 844K, 854G, 854K, 990, 990 II, 990H, 990K, 992C, 992D, 992G, 992K, 994
16G, 16H, 16H NA, 16M, 215, 215B, 215C, 3406, 3406B, 3408, 530B, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 815, 992C, 992D, CW-14, ...
3304, 926, 928F, 928G, 928HZ, 930G, CD-54, CD-54B, D330A, D330B, IT18F, IT28, IT28F, IT28G
6L9763
CUP-BEARING
3116, 3126, 3208, 3304, D330B
3116, 3126, 3208, 3304, D330B
14G, 14H, 14H NA, 16G, 16H, 16H NA, 225, 3116, 3126, 3126B, 3208, 3304, C7, CP-563, CS-531C, CS-563C, CS-573C, CS-583C, D330A, D330B, RM-250C, RR-250B
0021214
CUP-BEARING
3116, 3126, 3208, 3304
3116, 3126, 3208, 3304
8E0746
CUP-BEARING
3116, 3126
3116, 3126
3116, 3126, 3126B, 3208, C7
3116, 3126, 3126B, 3208
1003004
CUP
3116, 3126, 3126B, 3208
3116, 3126, 3126B, 3208
3116, 3126
3116, 3126, 3126B, 3208