CUP-BEARING 6M1638 - Caterpillar

Three60 Pod Control Group (if equipped)
Illustration 1 g03803543
Three60 Pod Control Group (if equipped)
Select the "Three60 Pod Control" icon on the direct-access screen to access the home screen. Refer to Illustration 1.Information displayed on the "Three60 Pod" home screen for dual engine configurations includes the following:Note: The listed information is displayed for the port and starboard engines.
Engine speed (round gauge)
Pod shaft speed (round gauge)
Engine coolant temperature
Engine oil pressure
Transmission oil temperature
Transmission oil pressure
Battery voltage
Pod angle (visual indication)
"Three60 Hold" status (off/on)Three60 Pod - Port side details
Illustration 2 g03803574
Port engine details from the "Three60 Pod" control home screen
Swipe right from the "Three60 Pod" home screen to display the details of the port engine. Refer to Illustration 2.The "Three60 Pod" home screen displays the following:
Engine speed
Coolant temperature
Engine oil pressure
Transmission oil temperature (bar gauge)
Fuel temperature (bar gauge)
Manifold temperature (bar gauge)
Transmission oil pressure (bar gauge)
Fuel pressure (bar gauge)
Boost pressure (bar gauge)
Engine load
Fuel consumption rate
Total engine operating hours
Coolant level (OK/LOW)
Battery voltageThree60 Pod - Starboard side
Illustration 3 g03803587
Starboard engine details from the "Three60 Pod" control home
From the "Three60 Pod" home screen, swipe left to display details of the starboard engine shown in Illustration 3.Three60 Hold Active
Note: "Three60 Hold" can only be activated from the bridge display.
Illustration 4 g03803197To activate "Three60 Hold", press and swipe or tap the "Three60 Hold" soft button on the "Three60 Pod" home screen.If all criteria for "Three60 Hold" are met, the "Three60 Hold" acknowledgment screen will appear. Refer to Illustration 4.
The vessel is underway with propellers spinning and may move suddenly without warning. Being in the water near the vessel may result in personal injury.Read the Operation and Maintenance Manual for safe use of the system. Stay out of the water while the vessel is underway and hold on to prevent falling into the water. Always be aware of your surroundings.
Illustration 5 g06046478Read the preceding caution. Tap the "ACCEPT" soft button, shown in Illustration 4 to transition to "Three60 Hold". Tap the "CANCEL" soft button to return to the previously displayed screen.Note: If "ACCEPT" is tapped, the GPS position of the vessel is stored in the Three60 control as the "Hold Position". The "Three60 Hold" home screen, shown in Illustration 5 will appear.
Illustration 6 g03803615
Vessel drift present in "Three60 Hold"
Refer to Illustration 6. The port and starboard propeller shaft speeds are shown in the upper left and upper right of the screen. The "Three60 Hold" status is shown in the lower left.The status of the pod angles is shown in the lower right. In the center of the screen is a display of the location of the vessel with respect to the hold position.Upon entering "Three60 Hold", the vessel icon is centered on the screen, and is shown in green. If the vessel drifts off the hold position, the vessel icon will move from the center, in the direction of the drift. The three circles indicate how much the vessel has drifted. If the vessel drifts more than 6 m (20 ft) from the hold location, the vessel icon will be in the second circle. The vessel icon will