CUP-ROLLER BEARING 7J8894 - Caterpillar

Engine:
3516C (S/N: PAG1-UP; TTJ1-UP; JTS1-UP; TKT1-UP; TKX1-UP; TKY1-UP)
Description of Change: The new tube has been improved with O-ring face fittings to withstand engine vibrations.Adaptable To: The 464-1833 Tube As. replaces the existing 261-6796 Tube. The new tube assembly is adaptable back to first production on the serial numbers listed above. When installing the new tube assembly use new parts that are listed in Table 1.
Table 1
Qty     New Part Number     Description    
1     464-1833     Tube As.    
1     0S-1588     Bolt    
4     165-3929     Bolt    
2     0S-1594     Bolt    
1     0S-1595     Bolt    
1     228-7093     O-Ring Seal    
1     238-5084     O-Ring Seal    
4     2B-2695     Bolt    
1     352-7222     Check Valve Gp    
1     3P-0653     O-Ring Seal    
1     459-0643 (1)     Ball Valve    
1     459-1810     Plate    
1     459-7295     Flange    
1     4B-3140     Cover    
6     5M-2894     Washer    
1     5P-5846     O-Ring Seal    
1     6V-5100     O-Ring Seal    
1     6V-9008     Elbow Adapter    
4     9M-1974     Washer    
( 1 ) Only used when RH 447-8608 Jacket Water Heater Mounting Gp or 430-2747 Jacket Water Heater Mounting Gp are used. This change is effective for the serial numbers listed in Table 2.
Table 2
Effective Serial Numbers    
S/N:PAG00483-UP    
S/N:JTS00523-UP    
S/N:TTJ00638-UP    
S/N:TKT00244-UP    
S/N:TKX00206-UP    
S/N:TKY00329-UP    Installation Procedure
Illustration 1 g03741693
(1) 261-6796 Tube (2) Bracket
Remove tube (1) and bracket (2) from the engine.
Illustration 2 g03741868
(3) 0S-1595 Bolt
Illustration 3 g03741875
(4) 0S-1588 Bolt
After removing tube (1) and bracket (2) replace bolt (3) and bolt (4).
Illustration 4 g03741882
(5) Elbow Assembly
Remove elbow assembly (5).
Illustration 5 g03741918
(6) 4B-3140 Cover (7) 5P-5846 O-Ring Seal (8) 0S-1594 Bolts (9) 5M-2894 Washers Note: Verify that the O-ring (7) is in the plate groove before installation.
Install cover (6) with O-ring (7), bolt (8), and washer (9).
Illustration 6 g03741941
(10) Elbow (11) Plate
Remove elbow (10) and plate (11) from the pre-lube and oil cooler.
Illustration 7 g03741951
(9) 5M-2894 Washers (12) 459-1810 Plate (13) 3P-0653 O-Ring Seal (14) 165-3929 Bolts (15) 459-7295 Flange (16) 6V-5100 O-Ring Seal (17) 2B-2695 Bolts (18) 9M-1974 Washers
Install plate (12) with O-ring (13), bolts (14) and washers (9).
Install flange (15) with O-ring (16), bolts (17) and washers (18).
Illustration 8 g03742050
(19) 6V-9008 Elbow (20) 238-5084 O-Ring Seal (21) 228-7093 O-Ring Seal (22) 352-7222 Check Valve
Install elbow (19) with O-ring (20) and O-ring (21).
Install check valve (22).
Illustration 9 g03742066
(23) 464-1833 Tube As.
Install tube assembly (23).