CUSHION A. 9C3362 - Caterpillar

Components for the Steering System
Illustration 2 g01134711
View of the Articulation Joint (1) Left steering cylinderSecondary steering diverter valve (7) and secondary steering pump (8) are mounted to the output transfer gears for the transmission.
Illustration 3 g01138959
Case drain filter (29) for the left steering pump is mounted to the engine end frame on the left side of the machine. The case drain filter for the right steering pump is mounted to the engine end frame on the right side of the machine. Filter bypass switches (26) are installed into the filter base of the case drain filters.Filters (11) are located in the compartment that is behind the operator compartment. The filters are mounted by the brake accumulators on the right side of the engine end frame. Pressure switch (12) is mounted in the filter.Screens (15) for the steering pump output are located in the compartment behind the operator compartment. The screens are mounted to the left side of the engine end frame.Steering control valve (14) is located in the compartment behind the operator compartment. The steering control valve is mounted to the right side of the engine end frame. Selector and pressure control valve (27) is mounted to the steering control valve.Pressure and flow compensator valves (17) are mounted on the steering pumps. Steering pumps (8) and (23) are located in the compartment behind the operator compartment. The steering pumps are mounted on the front side of the rear pump drive.Selector and pressure control valve (27) is located on the right side of the engine end frame. The valve is mounted beside the brake accumulators.
Illustration 4 g01137132
Location of Hydraulic tank and Filter (11) Filter for the oil cooler circuit. (30) Hydraulic tank for the steering and brake systems.The VIMS refers to the filter for the steering and brake systems as "STRG COOL FLTR".
Illustration 5 g01137137
View of the Pressure Switch for the Filter (11) Filter for the steering and brake systems. (12) Pressure switch.Filter (11) and hydraulic tank (30) are located in the compartment above the rear pump drive. Pressure switch (12) is installed in the filter for the steering and brake systems.
Illustration 6 g01137157
Location of the gear pump for the steering and oil cooler circuit (20) Gear pump for the steering and the brake oil cooler system.Gear pump (20) is located in the compartment that is in front of the engine compartment. Access is gained by removing the panel on the left side of the engine end frame. The gear pump is mounted on the back side of the rear pump drive.
Illustration 7 g01137141
Location of the Left Steering Neutralizer Valve (21) Left steering neutralizer valve.Left steering neutralizer valve (21) is located under the operator compartment. The right steering neutralizer valve is also located under the operator compartment. The steering neutralizer valves are mounted above the upper hitch assembly on the engine end frame.
Illustration 8 g01137160
View of the Steering Pilot Valve (24) Steering pilot valve.Steering pilot valve (24) is located in the operator compartment. The steering pilot valve is mounted in the armrest assembly.
Illustration 9 g01137167
Location of the