CUTTER-MAIN 1446879 - Caterpillar

Illustration 1.
Tandem group with former 126-7190 Cover Assembly.
Illustration 2.
Tandem group with new 152-2693 Cover Assembly. Procedure To Fabricate And Install Plates On Existing Cover Assemblies
Illustration 3.
Fabrication dimensions for 152-2692 Plates (not serviced). 1. Fabricate four 152-2692 Plates (not serviced) to the dimensions shown in Illustration 3 and Chart 2. Use 2 mm (.087 in) thick manufacturer's standard carbon steel with a minimum yield strength of 140 MPa (20,320 psi).
Illustration 4.
Bend dimensions. 2. Bend each 152-2692 Plate to the dimensions shown in Illustration 4 and Chart 3.
Illustration 5.
Weld Data. 3. Weld two 152-2692 Plates (2) to the exisiting cover assembly (1) as shown in Illustration 5 and Chart 4.