CUTTER A 6V6191 - Caterpillar

Removal Procedure
Start By:
Purge the air pressure from the air tanks. Refer to Disassembly and Assembly, "Air Tanks (Brake) - Purge".
Personal injury can result from removing hoses or fittings in a pressure system.Failure to relieve pressure can cause personal injury.Do not remove or disconnect hoses or fittings until all pressure in the air system has been relieved.
Illustration 1 g00843998
Disconnect hose assembly (1) from check valve (2).
Remove check valve (2) from the air tank. Installation Procedure
Verify that all of the components of the check valve are clean and free of foreign material prior to installation.
Inspect all components for wear and replace the components, if necessary.
Illustration 2 g00843998
Install check valve (2) to the air tank.
Connect hose assembly (1) to check valve (2). End By:
Close the drain valves. Refer to Disassembly and Assembly, "Air Tanks (Brake) - Purge".