CUTTING EDG 2221039 - Caterpillar

Replacement Procedure
Personal injury can result from hot coolant. Any contact with hot coolant or with steam can cause severe burns. Allow cooling system components to cool before the cooling system is drained.
Drain the cooling system. Use appropriate containment and disposal procedures.
Illustration 1 g03720064
Location of clamp on engine thermostat hose
Remove the 216-4983 Clamp from the engine thermostat hose.
Inspect the 322-0955 Hose for cracks and defects and replace damaged or defected parts as needed.
Install a new 467-2726 Clamp on the engine thermostat hose. Tighten the clamp to 11 N m (8 lb ft).
Install a 3E-4096 Cap on the clamp rod after the clamp has been tightened to specification.
Illustration 2 g03720078
Location of clamp on water pump hose
Remove the 216-4983 Clamp from the water pump hose.
Inspect the 322-0952 Hose for cracks and defects and replace damaged or defected parts as needed.
Install a new 467-2726 Clamp on the water pump hose. Tighten the clamp to 11 N m (8 lb ft).
Install a 3E-4096 Cap on the clamp rod after the clamp has been tightened to specification.
Refill the cooling system.