CUTTING EDGE 3J8308 - Caterpillar

Table 3
3126 Cylinder Block
Replacement Part Numbers for Main Bearings    
Description     Qty     Part Numbers for Standard Size Bearings     Part Numbers for Oversize/Undersize Bearings     Size    
Thrust Bearing     1     229-5153     -     Standard    
- 229-5155    
0.50 mm (0.020 inch) Oversize    
- 229-5156    
0.50 mm (0.020 inch) Undersize
0.50 mm (0.020 inch) Oversize    
- 229-5154    
0.50 mm (0.020 inch) Undersize    
Main Bearing     6     107-7708     -     Standard    
- 145-0168    
0.50 mm (0.020 inch) Oversize    
- 145-0170    
0.50 mm (0.020 inch) Undersize
0.50 mm (0.020 inch)
Oversize    
- 145-0164    
0.50 mm (0.020 inch) Undersize    Part Numbers For Cylinder Head Gaskets
Table 4
Cylinder Head Gaskets    
Engine Model     Part Number for Standard Cylinder Head Gasket     Part Number for Thick Cylinder Head Gasket    
3116 Without Cylinder Sleeves     107-7832
or 205-1293     175-3234 or 119-2948    
3116 With Cylinder Sleeves     205-1293     119-2948    
3126     282-2464     282-2470    
3126B     282-2468     282-2474    
3126E     282-2468     282-2474    
C7     282-2468     282-2474    
Illustration 2 g00619401
"TG" is stamped on the top surface of the cylinder block.
Illustration 3 g00619437
Location of Remanufacture Information Tag"TG" will be stamped on the top surface of a remanufactured cylinder block that has been machined by Caterpillar to a dimension between 321.50 to 321.75 mm (12.657 to 12.667). A Caterpillar remanufactured cylinder block that is machined to this dimension will have "TG" on the remanufacture information tag. These remanufactured cylinder blocks require a thick cylinder head gasket.