4T2981 CUTTING EDGE Caterpillar parts
Rating:
Alternative (cross code) number:
CA4T2981
4T-2981
4T2981
CA4T2981
4T-2981
4T2981
Weight: 122 pounds 55 kg.
Information:
ABRASION RESISTANT MATERIAL
N
BOLT HOLE SIZE
.625
mm
CHAMFER
EDGE
HOLE PATTERN
CENTERLINE
HOLE SPACING
101.6
mm
LENGTH
2334.2
mm
NUMBER OF HOLES
23
THICKNESS
16
mm
TUNGSTEN CARBIDE
N
WIDTH
203.2
mm
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 4T2981 Bulldozer Blade for Model D4A, Center Edge, 0.62" Edge Thickness
CTP For Model D4A || Center Edge || 0.62" Edge Thickness
CTP For Model D4A || Center Edge || 0.62" Edge Thickness
$248.32
23 Feb 2024
Amazon.com
CTP 4T2981 Bulldozer Blade for Model D4A, Center Edge, 0.62" Edge Thickness
CTP For Model D4A || Center Edge || 0.62" Edge Thickness
CTP For Model D4A || Center Edge || 0.62" Edge Thickness
$260.99
14 Jun 2023
Amazon.com
CTP 4T2981 Bulldozer Blade for Model D4A, Center Edge, 0.62" Edge Thickness
CTP For Model D4A || Center Edge || 0.62" Edge Thickness
CTP For Model D4A || Center Edge || 0.62" Edge Thickness
For full view, you need register
Information:
The oxygen sensor is important for the control of emissions and engine performance.
During operation, the oxygen sensor may reach temperatures that exceed 700 °C (1292 °F). Severe personal injury and property damage will result from contact with a hot oxygen sensor.Do not touch the sensor during engine operation, calibration, or testing. Allow the sensor to cool before moving the sensor. Wear gloves that resist heat. Do not place the sensor on or near any flammable material or any surface that can be damaged by high temperatures.
The sensor must be calibrated periodically to ensure proper operation. If a new sensor will be installed, calibrate the new sensor after installation.For instructions, refer to Systems Operation, Testing and Adjusting, M0081470, .
During operation, the oxygen sensor may reach temperatures that exceed 700 °C (1292 °F). Severe personal injury and property damage will result from contact with a hot oxygen sensor.Do not touch the sensor during engine operation, calibration, or testing. Allow the sensor to cool before moving the sensor. Wear gloves that resist heat. Do not place the sensor on or near any flammable material or any surface that can be damaged by high temperatures.
The sensor must be calibrated periodically to ensure proper operation. If a new sensor will be installed, calibrate the new sensor after installation.For instructions, refer to Systems Operation, Testing and Adjusting, M0081470, .
Parts cutting Caterpillar catalog:
4T2955
CUTTING EDGE
Caterpillar
Caterpillar
4T2946
CUTTING EDGE
Caterpillar
Caterpillar
4T2890
CUTTING EDGE
Caterpillar
Caterpillar
4T2888
CUTTING EDGE
Caterpillar
Caterpillar
4T2867
CUTTING EDGE
Caterpillar
Caterpillar
4T2866
CUTTING EDGE
Caterpillar
Caterpillar
4T3442
CUTTING EDGE
Caterpillar
Caterpillar
4T3419
CUTTING EDGE
Caterpillar
Caterpillar
Caterpillar
4T3023
CUTTING EDGE
Caterpillar
Caterpillar
Caterpillar
Caterpillar