4T3421 CUTTING EDGE--CENTER--25MM(.984")THICK Caterpillar parts
Rating:
Alternative (cross code) number:
CA4T3421
4T-3421
4T3421
CA4T3421
4T-3421
4T3421
Weight: 131 pounds 59 kg.
Information:
ABRASION RESISTANT MATERIAL
N
BOLT HOLE SIZE
25
mm
CHAMFER
EDGE
HOLE PATTERN
CENTERLINE
HOLE SPACING
152.4
mm
LENGTH
1357.2
mm
NUMBER OF HOLES
9
THICKNESS
25
mm
TUNGSTEN CARBIDE
N
WIDTH
254
mm
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 4T3421 Ground Engaging Tools Cutting Edge
CTP For Ground Engaging Tools || Longer tips || Sold in each
CTP For Ground Engaging Tools || Longer tips || Sold in each
CTP 4T3421 Ground Engaging Tools Cutting Edge
CTP For Ground Engaging Tools || Longer tips || Sold in each
CTP For Ground Engaging Tools || Longer tips || Sold in each
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-3095 Puller Handle 1
B 6V-4194
(1) Valve Seat Extractor 1
1U-9167
(2) Valve Seat Extractor 1
(1) For use with Exhaust Valve Seat
(2) For use with Intake Valve SeatStart By:
Remove inlet and exhaust valves.
Illustration 1 g01137634
Use Tooling (A) and Tooling (B) to remove valve seat inserts (1). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
C 4C-6372(1) Valve Seat Driver 1
364-4009(2) Valve Seat Driver 1
(1) For use with Exhaust Valve Seat
(2) For use with Intake Valve Seat
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01137637Note: Do not machine the prefinished valve seat inserts in order to correct the valve stem projection. An excessive valve stem projection indicates that the valve seat insert is not seated or material was not cleaned from the bottom of the counterbore.
Lower the temperature of new valve seat inserts (1). Use Tooling (C) to install valve seat inserts (1) into the cylinder head. End By:
Install the inlet and exhaust valves.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-3095 Puller Handle 1
B 6V-4194
(1) Valve Seat Extractor 1
1U-9167
(2) Valve Seat Extractor 1
(1) For use with Exhaust Valve Seat
(2) For use with Intake Valve SeatStart By:
Remove inlet and exhaust valves.
Illustration 1 g01137634
Use Tooling (A) and Tooling (B) to remove valve seat inserts (1). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
C 4C-6372(1) Valve Seat Driver 1
364-4009(2) Valve Seat Driver 1
(1) For use with Exhaust Valve Seat
(2) For use with Intake Valve Seat
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01137637Note: Do not machine the prefinished valve seat inserts in order to correct the valve stem projection. An excessive valve stem projection indicates that the valve seat insert is not seated or material was not cleaned from the bottom of the counterbore.
Lower the temperature of new valve seat inserts (1). Use Tooling (C) to install valve seat inserts (1) into the cylinder head. End By:
Install the inlet and exhaust valves.
Caterpillar parts catalog:
Parts cutting Caterpillar catalog:
4T2326
CUTTING EDGE 41 MM (1.625 IN.) THICK
Caterpillar
Caterpillar
9J5901
CUTTING EDGE--62.18" LONG--1.12" THICK
Caterpillar
Caterpillar
9J1112
CUTTING EDGE
Caterpillar
Caterpillar
9J1110
CUTTING EDGE
Caterpillar
Caterpillar
7T3497
CUTTING EDGE
Caterpillar
Caterpillar
5J6972
CUTTING EDGE--7 FOOT
Caterpillar
Caterpillar
5J6971
CUTTING EDGE--6 FOOT
Caterpillar
Caterpillar
4D7475
CUTTING EDGE--7 FOOT
Caterpillar
Caterpillar
4D7472
CUTTING EDGE--6 FOOT
Caterpillar
Caterpillar
7J2979
CUTTING EDGE 1.625" THICK
Caterpillar
Caterpillar