CUTTING EDGE 4T8316 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Description Part Number Qty
A 6V-6146 Load Leveler Gp 1
189-0412 Clevis 1
189-0863 Shackle As 2
B 366-6003 Handler As 1 Start By:
Remove the crankcase guard.
Remove the power train guard.
Remove the rear drive shaft.
Remove the rear tires and rims.
Illustration 1 g03693885
Disconnect tube assembly (1) from rear trunnion support (2).
Illustration 2 g03693887
Disconnect tube assembly (3) from front trunnion support (4).
Illustration 3 g03693862
Disconnect hose assembly (5).
Remove clip (6).
Illustration 4 g03688965
Illustration 5 g03688970
Attach Tooling (A) and a suitable lifting device to oscillating axle (7). The weight of oscillating axle (7) is approximately 1520 kg (3350 lb).
Illustration 6 g03688990
Remove nuts (8) and the spacers. Remove nuts (9) and the spacers.
Illustration 7 g03688998
Remove nuts (10) and the spacers. Remove nuts (11) and the spacers.
Illustration 8 g03688970
Typical Example
Illustration 9 g03693877
Use Tooling (A) and the suitable lifting device to lower oscillating axle (7) onto Tooling (B). Remove the suitable lifting device from oscillating axle (7). Use Tooling (B) to move oscillating axle (7) from under the machine.Installation Procedure
Install oscillating axle (7) in the reverse order of removal.
Tighten nuts (8), (9), (10), and (11) to a torque of 450 50 N m (332 37 lb ft). Tighten the nuts an additional 120° 10°.