CUTTING EDGE (End-1" Thick) 5J6881 - Caterpillar

5J6881 CUTTING EDGE (End-1" Thick) Caterpillar parts 621, 621B, 627, 627B, 992

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5J6881
5J-6881
5J6881

Caterpillar 5J6881 CUTTING EDGE (End-1" Thick)

Weight: 0.08 pounds 0 kg.

Buy CUTTING EDGE (End-1" Thick) 5J6881 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER, WHEEL SCRAPER,

Compatible equipment models: 5J6881:

WHEEL LOADER 992

WHEEL SCRAPER 621 621B 627 627B Caterpillar

For full view, you need register

Information:

Illustration 2 g03391372
Disconnect hoses (5). Disconnect ground strap (4). Remove sensor assembly (6).
Illustration 3 g03391347
Disconnect hoses (7).
Illustration 4 g03391386
Disconnect all three hose assemblies (8) and the cable strap assemblies from the transmission. Disconnect clamps (9) and reposition cable assemblies. Disconnect clamps (10) and reposition hose assemblies.
Illustration 5 g03391397
Disconnect harness assemblies (11) and reposition out of the way. Disconnect clamp (12).
Illustration 6 g03391402
Disconnect hose assembly (13).
Illustration 7 g03391409
Disconnect hose assembly (14).
Illustration 8 g03391413
Disconnect fill tube (15) and reposition out of way.
Illustration 9 g03391417
Disconnect hose assemblies (16).
Illustration 10 g03391453
Disconnect hose assemblies (17) and (18). Disconnect clamp (19). Disconnect clamps (20.)
Illustration 11 g03391481
Disconnect cable assemblies (21) from starter motor. Disconnect hose assembly (22). Disconnect clamp (23).
Illustration 12 g03391490
Illustration 13 g03391515
Attach Tooling (B). Attach a suitable lifting device to Tooling (B) . Attach a suitable lifting device to the engine at lift points (24). The weight of the engine and transmission is approximately 3450 kg (7605 lb).
Attach Tooling (C) and a suitable lifting device to the suitable lifting devices mentioned in Step 14. Apply suitable tension to the suitable lifting devices.
Illustration 14 g03391643
Remove bolts (25) and (26). Use two people in order to remove mount assembly (27). The weight of mount assembly (27) is approximately 25 kg (55 lb). Repeat for the opposite side.
Illustration 15 g03391645
Illustration 16 g03391648
Remove bolt (28). Repeat for the opposite Use Tooling (B) and the suitable lifting device in order to remove engine, torque converter, transmission, and output transfer gears (29).