CUTTING-EDGE 7D2811 - Caterpillar

Illustration 1 g02004873
The TCS test switch is located in the overhead controls in the operator station.
Continue to turn the machine and push the top half of TCS test switch (1). Hold the test switch down. This will begin the test.
The machine will gradually slow down.
Release the test switch. The test will end and the machine will increase speed.
Turn the steering wheel all the way to the right. With the engine at an idle, slowly drive forward in a complete circle.
Continue to turn the machine and push the top half of the TCS test switch. Hold the test switch down. This will begin the test.
The machine will gradually slow down.
Release the test switch. The test will end and the machine will increase speed.
If the TCS did not function properly, consult your Caterpillar dealer for information and service.