CYL GP- 2344662 - Caterpillar

Illustration 1 g00583844
(1) 146-1740 Spring Quantity ... One Assembled load at 0 degrees deflection ... 1.07 N (0.241 lb) Length after test ... 36.58 mm (1.440 inch) Outside diameter ... 46.48 mm (1.829 inch) Wire diameter ... 2.49 mm (0.098 inch)
Illustration 2 g00280830
When spring (1) is assembled into position, you must attain the following conditions:
The ends of the spring must contact both pins (5) .
The inner diameter of the spring must contact pin (6) . (2) 151-0456 Spring Quantity ... One Test force ... 24.0 1.9 N (5.39 0.43 lb) Test length ... 40.13 mm (1.580 inch) Length after test ... 42.42 mm (1.670 inch) Outside diameter ... 17.27 mm (0.660 inch) (3) 143-8302 Spring Quantity ... One Test force ... 63.0 6.0 N (14.2 1.3 lb) Test length ... 42.60 mm (1.677 inch) Length after test ... 69.45 mm (2.734 inch) Outside diameter ... 27.0 mm (1.06 inch) (4) 135-7479 Valve Group Clearance for the fit of the stem to the sleeve ... .046 .005 mm (0.0018 0.0002 inch) (7) Torque for plug ... 80 7 N m (60 5 lb ft) (8) Torque for two bolts ... 40 10 N m (30 7.4 lb ft) (9) The spool must fit freely over the male spline on the shaft assembly. Position the spool so that the hole in the spool aligns with the hole in the body.
Illustration 3 g00278780
(10) Torque for four bolts ... 50 10 N m (37 7 lb ft) (11) Torque for nut ... 25 10 N m (18 7.4 lb ft)