CYL GP-0165 2442281 - Caterpillar

Specifications
Illustration 1 g02353780
Table 1
SPECIFICATIONS FOR 293-5340 Pressure Sensor    
Callout     Part Number     Part Name     Specification Description    
-     -     -     Apply 161-9203 Grease Cartridge to the threads.
Torque to.........................
45 6 N m (33 4 lb ft)
Operating voltage............5.00 0.25 VDC
Operating temperature...
-40° to 125° C (-40° to 257° F)    Removal Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     5P-0332     Crowfoot Wrench     1    
B     161-9203     Grease Cartridge     1    
Contact with high pressure fuel may cause personal injury or death. Wait 60 seconds after the engine has stopped to allow fuel pressure to purge before any service or repair is performed on the engine fuel lines.
Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard. Failure to follow these inspection, maintenance and service instructions may cause personal injury or death.
Illustration 2 g02144263
Disconnect harness assembly (1) .
Fuel pressure sensor (2) must only be used once. Discard fuel pressure sensor (2) after use.
Use Tooling (A) in order to remove fuel pressure sensor (2). Discard fuel pressure sensor (2) .Installation Procedure
Install the new fuel pressure sensor (2) in reverse order of removal.
Apply Tooling (B) to the threads of new fuel pressure sensor (1) .
Use Tooling (A) in order to tighten new fuel pressure sensor (1) to a torque of 45 6 N m (33 4 lb ft).