CYL GP-HYD 3534633 - Caterpillar

Install 255-1724 Pilot Lines Gp. Refer to Table 15 for a list of the required parts. Refer to Illustrations 3132, and 33 for the location of the parts.Removal of Standard Parts
Before installing 274-0463 Stick Cylinder Lines Gp of the 356-7976 Check and Relief Valve Ar, remove the parts listed below.
Table 28
Standard Removal Parts
Item Part Number Part Name Qty
1 6V-8200 Bolt 4
2 095-1600 O-Ring Seal 1
3 227-6861 Tube As 1
4 8T-4196 Bolt 2
5 8T-4896 Hard Washer 2
6 124-1020 Support 1
7 124-1019 Support As 1
8 096-4447 Clamp 1
9 8T-4648 Bolt 1
10 8T-4223 Hard Washer 1
Illustration 34 g03890348
(1) 8T-4646 Bolt
(2) 1P-3704 O-Ring Seal
(3) 216-6645 Tube As
(4) 8T-4196 Bolt
(5) 8T-4121 Hard Washer
(6) 119-2378 Support
(7) 119-2379 Support As
(8) 7Y-3732 Clamp
(9) 8T-4139 Bolt
(10) 8T-4223 Hard Washer
(11) 6I-6721 Elbow
Remove the standard parts listed in Table 28 and shown in Illustration 34.Installation of 274-0463 Stick Cylinder Lines Gp
Illustration 35 g03890313
274-0463 Stick Cylinder Lines Gp
(J1) 093-1294 Clamp
(J2) 274-0464 Tube As
(J3) 247-9322 Tube As
(J4) 274-0465 Pipe As
(J5) 274-0469 Pipe As
(F6) 258-0252 Load Control Valve Gp
(J7) 119-2379 Support As
(J8) 188-0072 Support As
(J9) 3E-8007 Bolt
(J10) 148-8340 Connector As
(J11) 148-8368 Elbow As
(J12) 148-8368 Clip
(J13) 1P-3703 Rectangular Seal
(J14) 1P-3704 Rectangular Seal
(J15) 5K-9090 O-Ring Seal
(J16) 6V-8397 O-Ring Seal
(J17) 6V-8398 O-Ring Seal
(J18) 8T-4121 Hard Washer
(J19) 8T-4139 Bolt
(J20) 8T-4186 Bolt
(J21) 8T-4196 Bolt
(J22) 8T-4223 Hard Washer
(J23) 8T-4648 Bolt
(J24) 6I-6721 Elbow
(J25) 7Y-4690 Elbow
(J26) 190-7696 Plate
(J27) 4J-0520 O-Ring Seal
(J28) 6V-8400 O-Ring Seal
Install 274-0463 Stick Cylinder Lines Gp. Refer to Table 14 for a list of the required parts. Refer to Illustration 35 for the location of the parts.