CYL GP- 4649559 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before you begin the installation procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism.Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components, if necessary.
Illustration 1 g01360529
Install wiper motor (13). Connect harness assembly (12) .
Illustration 2 g01360505
Install gasket (11). Install nut (10). Tighten nut (10) to a torque of 38 2 N m (28 2 lb ft).
Install cap (9) and install bolt (8). Tighten bolt (8) to a torque of 6 1 N m (53 9 lb in).
Illustration 3 g01360484
Install new sticker (4). Install wiper arm (7) .
Install nut (5). Tighten nut (5) to a torque of 23 1 N m (17 1 lb ft).
Lower cover (3). Connect hose (6) .
Illustration 4 g01359882
Position cover (2) and install bolts (1). Tighten bolts (1) to a torque of 16 1 N m (12 1 lb ft).