CYL GP-BASIC 4737492 - Caterpillar

start by:a) remove engine1. Remove the cover and output shaft assembly from the engine.2. Make a mark on the flywheel and the crankshaft at the same locations. The marks will be used to install the flywheel in the same position. 3. Remove eight of the bolts (1) that hold the flywheel. 4. Fasten tool (A) to the flywheel. Fasten a hoist to tool (A). Remove the one bolt from the flywheel. Remove flywheel (2). Weight of the flywheel is 60 lb. (27 kg).Install Flywheel
1. Install two 5/8"-18 NF guide pins in the crankshaft. 2. Fasten tool (A) and a hoist to the flywheel.3. Put flywheel (1) in position on the guide pins. Make sure the mark on the crankshaft is in alignment with the mark on the flywheel.4. Install the bolts that hold the flywheel to the crankshaft.5. Install the output shaft and cover on the tractor engine.end by:a) install engine