CYL GP-0210- 5R9338 - Caterpillar

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01022875
Illustration 2 g01064053
Disconnect the harness assembly from camshaft position sensor (3) .
Remove bolt (1) and the washer.
Remove camshaft position sensor (3) and bracket (2) as a unit from the front housing.
Inspect the condition of the O-ring seal on camshaft position sensor (3). Replace the O-ring seal, if necessary.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g01064053
Illustration 4 g01022875
Install camshaft position sensor (3) and bracket (2) as a unit into the front housing.
Install bolt (1) and the washer.
Connect the harness assembly to camshaft position sensor (3) .
Calibrate the engine speed-timing. Refer to Electronic Troubleshooting for more information.