CYL GP- 6E5973 - Caterpillar

Illustration 36 g02918999 (Step 2) Highlight "Security System" and press OK, highlight "user 1" and press OK.
Illustration 37 g02985056
Illustration 38 g02985079 (Step 3) Highlight "Password Change" and press OK. Then change each digit to the desired password and press OK each time.
Illustration 39 g02919676 (Step 4) You will need to confirm the password after changing to ensure that the incorrect button was not hit.Note: Remember this password. If the user password is forgotten, the owner can change as desired. To change the user password, Log in to the machine with the owner password and redo the steps above.Service Password Entry
When you try to access certain menus, you will be prompted to enter a password. Follow this procedure to enter the password.
Illustration 40 g02922742
Press button 1 through button 4 to select the desired character.Note: When the machine leaves the factory, the password is initially set as FFF2.Security System
The new E series MHE's come with a standard password protected Anti-theft device. The system is disabled on machines from the factory to prevent locking the machine during delivery. This system can be installed by following a few simple steps.Install the security system
(1) Press the top button for Main Menu. Highlight Service and press OK and enter FFF2 for the password .
Illustration 41 g02915676 (2) Highlight "Security System" and press OK on the next two screens.
Illustration 42 g02917777 (3) Press the button next to "installed". Press the Home key to go back to the main screen.
Illustration 43 g02915837The Security System is now installed. The default owner password from the factory is A1234.Note: When the security system is installed, only the owner can enter Service mode, change passwords, enable users, change clock settings, and reset maintenance intervals.Change the Owner Security System Password
The default owner password is A1234. The owner password always begins with the letter A. The 4-digit PIN can be changed to any numbers between 0 and 9.Note: The 4-digit password can be changed by following these steps (1) Press the top button for main menu. Highlight "Security System" and press OK.
Illustration 44 g02915858 (2) Highlight "Password Change" and press OK.
Illustration 45 g02915879 (3) Change each digit to the desired password and press OK each time.
Illustration 46 g02915898 (4) You will need to confirm the password after changing to ensure that you did not hit the incorrect button.Note: The password must be delivered. The only way to change the password is to flash a "wash" file through Electronic Technician. After using the wash file, the owner password will default back to A1234. Consult your Cat dealer for more information.
Illustration 47 g03352727When switching off the machine, if the Security System is installed, the monitor will display three options. (1) Choose "1 Minute" and there will be a "1 Minute" delay before the machine engages the Security System. During this time, the key may be re-engaged and the machine will restart. (2) Choose "60 Minutes and there will be a 1-hour delay before the Security System engages. During this time you can re-engage the key and the machine will start. (3) Choose "Unlimited" and the Security