7J9728 CYL AS-HYD Caterpillar parts
930, 930R
Rating:
Alternative (cross code) number:
CA7J9728
7J-9728
7J9728
CA7J9728
7J-9728
7J9728
Weight: 52 pounds 23 kg.
Information:
BEARING TYPE
SLEEVE
BORE DIAMETER
108
mm
GREASE PORT
N
MOUNT TYPE
EYE
TYPE
3
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 7J9728 Hydraulic Cylinder for Model 930/930R
CTP For Model 930/930R || Sold in each || Easy in-and-out fit
CTP For Model 930/930R || Sold in each || Easy in-and-out fit
CTP 7J9728 Hydraulic Cylinder for Model 930/930R
CTP For Model 930/930R || Sold in each || Easy in-and-out fit
CTP For Model 930/930R || Sold in each || Easy in-and-out fit
Number on catalog scheme:
5
For full view, you need register
Information:
Remove & Install Fuel Filter & Fuel Filter Base
1. Use Tool (A) and remove fuel filter (5). 2. Disconnect hose assemblies (1) and (2) from fuel filter base (4). Cap and plug immediately.3. Remove two bolts (3) and the washers that hold fuel filter base (4) in position. Remove fuel filter base (4).4. If necessary, remove the fuel priming pump from the fuel filter base (4). See the topic "Remove Fuel Priming Pump" in this module.5. If necessary, remove the fuel filter mounting stud from the fuel filter base (4). The following steps are for the installation of the fuel filter and fuel filter base.6. If the fuel filter mounting stud was removed from the fuel filter base, reinstall it. Put 9S3263 Thread Lock on the tapered end of the stud to a distance of 7.6 mm (.30 in). Install the stud in the fuel filter base, and tighten it to a torque of 70 15 N m (50 11 lb ft).7. If the fuel priming pump was removed, install the fuel priming pump on the fuel filter base (4). See the topic "Install Fuel Priming Pump" in this module.8. Put fuel filter base (4) in position on the engine, and install two washers and bolts (3) that hold it.9. Connect hose assemblies (1) and (2) to fuel filter base (4).10. Install a new fuel filter (5). Follow the instructions on the fuel filter for the installation procedure.
1. Use Tool (A) and remove fuel filter (5). 2. Disconnect hose assemblies (1) and (2) from fuel filter base (4). Cap and plug immediately.3. Remove two bolts (3) and the washers that hold fuel filter base (4) in position. Remove fuel filter base (4).4. If necessary, remove the fuel priming pump from the fuel filter base (4). See the topic "Remove Fuel Priming Pump" in this module.5. If necessary, remove the fuel filter mounting stud from the fuel filter base (4). The following steps are for the installation of the fuel filter and fuel filter base.6. If the fuel filter mounting stud was removed from the fuel filter base, reinstall it. Put 9S3263 Thread Lock on the tapered end of the stud to a distance of 7.6 mm (.30 in). Install the stud in the fuel filter base, and tighten it to a torque of 70 15 N m (50 11 lb ft).7. If the fuel priming pump was removed, install the fuel priming pump on the fuel filter base (4). See the topic "Install Fuel Priming Pump" in this module.8. Put fuel filter base (4) in position on the engine, and install two washers and bolts (3) that hold it.9. Connect hose assemblies (1) and (2) to fuel filter base (4).10. Install a new fuel filter (5). Follow the instructions on the fuel filter for the installation procedure.
Caterpillar parts catalog:
Parts cyl Caterpillar catalog:
930, 930R
8H5864
CYL HEAD & VALVE MECHANISM GP
583H, D342C, D8H
583H, D342C, D8H
D353C, D9G, D9H
3990744
CYL & MTG GP-SCREED EXTENSION
SE60 V XW
SE60 V XW
8U6393
CYL GP-VALVE &
211B, 212B
211B, 212B
4577730
CYL & MTG GP-SCREED EXTENSION
Caterpillar
Caterpillar
4381652
CYL & MTG GP-SCREED EXTENSION
Caterpillar
Caterpillar
1232119
CYL AS-HYD
320B FM LL, 320C, 320C FM, 325B
320B FM LL, 320C, 320C FM, 325B
966C
930, 930R