CYLINDER G. 0322503 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01286147
Position the gasket and transmission speed sensor (8) on the machine.
Install bolts (7) .
Connect clips (5) .
Connect harness assemblies (4) and (6) .
Illustration 2 g01286141
Position guard (3) and bolts (2) .
Connect clip (1) .
Fill the transmission with oil. Refer to Operation and Maintenance Manual, "Transmission Oil - Change".End By: Install the platform. Refer to Disassembly and Assembly, "Platform - Remove and Install".