CYLINDER A 0690195 - Caterpillar

Table 1
Model    Effective With    Adaptable To    
R2900G     S/N:GLK578-UP     S/N:GLK1-577    
R2900G     S/N:JLK1112-UP     S/N:JLK1-1111    
Table 2
Qty    New Part Number    Former Part Number    Part Name    
9     0L-2070     165-3929     Bolt    
9     4N-0205     -     Spacer    Refer to the following procedure in order to install the new flywheel housing bolts.
Table 3
Required Tools    
Tool    Part Number    Part Description    Qty    
A     -     Loctite 7649     1    
B     -     Loctite 271     1    
Illustration 1 g03387085
(1) 165-3929 Bolt (2) 108-4758 Housing As
Illustration 2 g03387074
Bolt location and tightening sequence
Remove and discard nine 165-3929 Bolts (1) as numbered in Illustration 2. Retain 5M-2894 Hard Washers .Note: Leave one 165-3929 Bolt (1) in location. Refer to Illustration 2.
Illustration 3 g03387077
Schematic of new bolt (3) 0L-2070 Bolt (4) 5M-2894 Hard Washer (5) 4N-0205 Spacer
Install one 5M-2894 Hard Washer (4) and one 4N-0205 Spacer (5) onto each 0L-2070 Bolt (3) .
Apply Tool (A) and then apply Tool (B) to the threads of 0L-2070 Bolts (3) prior to assembly.
Illustration 4 g03387073
(2) 108-4758 Housing As (3) 0L-2070 Bolt (4) 4N-0205 Spacer
Install nine 0L-2070 Bolts (3) .
In the numerical sequence detailed in Illustration 2, tighten nine 0L-2070 Bolts (3) to 55 10 N m (40 7 lb ft).