CYLINDER PACK GP 0R4488 - Caterpillar

Ensure that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, filters, and the installation of new components due to normal wear and aging. The performance of this product may be diminished if proper maintenance intervals and procedures are not followed. Components may experience accelerated wear if proper maintenance intervals and procedures are not followed.Note: Use whichever of the following that occurs first in order to determine the maintenance intervals: mileage, fuel consumption, service hours and calendar time . Before each consecutive interval is performed, all maintenance from the previous intervals must be performed.Products that operate in severe operating conditions may require more frequent maintenance.When Required
Battery - Replace
Battery or Battery Cable - Disconnect
Crankshaft End Play - Test
Engine Air Cleaner Element - Clean/Replace
Engine Oil Level Gauge - Calibrate
Engine Oil Level Gauge - Calibrate
Fuel System - Prime
Severe Service Application - Check
Daily
Cooling System Coolant Level - Check
Engine Air Cleaner Service Indicator - Inspect
Engine Oil Level - Check
Fuel System Primary Filter/Water Separator - Drain
Fuel System Water Separator - Drain
Walk-Around Inspection
PM Level 1 - Every 24 000 km (15 000 miles) or 9500 L (2500 US gal) of Fuel or 300 Service Hours
Air Compressor Filter - Clean/Replace
Alternator - Inspect
Battery Electrolyte Level - Check
Belt - Inspect
Belt Tensioner - Inspect
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Cylinder Head Grounding Stud - Inspect/Clean/Tighten
Engine Crankcase Breather - Clean