CYLINDER 1094703 - Caterpillar

Electrical Power Lines (9)
This safety message is located in the cab.
g01374045
Electrocution Hazard! Keep the machine and attachments a safe distance from electrical power. Stay clear 3 m (10 ft) plus twice the line insulator length. Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions and warnings will cause serious injury or death
Refer to Operation and Maintenance Manual, "Specifications" for further information.(10) Crushing HazardThis safety message is located in the cab.
g01382703
Crushing Hazard! Keep the work tool away from the cab during operation. Personal injury or death may result if the work tool contacts the cab during operation.
Hot Radiator (11)This warning is located on the coolant reservoir which is adjacent to the supply tube.
g01371640
The coolant is hot and the coolant is under pressure. Do not touch the hot surfaces. Refer to the Operation and Maintenance Manual for the procedure to follow when you check the radiator.
Do Not Spray Ether (12)This warning is located on the engine inlet manifold and on the air cleaner.
g01372254
Do not use ether. This machine is equipped with glow plugs. Using ether can create explosions or fires that can cause personal injury or death. Read and follow the engine starting procedure in the Operation and Maintenance Manual.
Improper Connections for Jump Start Cables (13)This warning is located on the support assembly next to the battery.
g01370909
IMPROPER JUMPER CABLE CONNECTIONS CAN CAUSE EXPLOSION RESULTING IN PERSONAL INJURY.BATTERIES MAY BE LOCATED IN SEPARATE COMPARTMENTS. WHEN USING JUMPER CABLES, ALWAYS CONNECT POSITIVE (+) CABLE TO POSITIVE (+) TERMINAL OF BATTERY CONNECTED TO STARTER SOLENOID AND NEGATIVE (-) CABLE FROM EXTERNAL SOURCE TO STARTER NEGATIVE (-) TERMINAL (IF MACHINE NOT EQUIPPED WITH STARTER NEGATIVE TERMINAL, CONNECT TO ENGINE BLOCK.) FOLLOW PROCEDURE IN THE OPERATION MANUAL.
Refer to Operation and Maintenance Manual, "Engine Starting with Jump Start Cables" for further information.Electrical Shock Hazard (14)
Illustration 5 g01372247
This safety message is located on the generator control panel. The generator control panel is located inside the access cover on the front right side of the machine.
Before servicing, turn generator disconnect switch to the OFF position. Failure to do so could result in serious injury or death.
Rotating Fan (15)This warning label is located behind the access door on each side of the machine.
g01383892
Keep hands clear of fan while engine is running. May cause serious injury or death.