CYLINDER BLOCK GP-LONG 10R4144 - Caterpillar

Tighten nuts that hold the fuel lines to a torque of (use 5P144 Fuel Line Socket) ... 40.6 6.8 N m (30.00 5.00 lb ft)(1) Tighten bushing to a torque of ... 163 14 N m (120 10 lb ft)(2) 8N1415 Spring (reverse flow check): Length under test force ... 8.69 mm (.342 in)Test force ... 111.21 6.45 N (25 1.4 lb)Free length after test ... 12.12 mm (.477 in)Outside diameter ... 9.78 mm (.385 in)(3) Thickness of 4W6869 Spacer ... 5.049 0.005 mm (.1988 .0002 in)(4) 4P9831 Spring: Length under test force ... 44.5 mm (1.75 in)Test force ... 74.50 3.73 N (16.7 .8 lb)Free length after test ... 47.85 mm (1.883 in)Outside diameter ... 25.98 mm (1.023 in)Color code (stripes) ... one yellow(5) Length of pump plunger (new) ... 73.886 0.013 mm (2.9089 .0005 in) Minimum permissible length (worn) ... 73.873 mm (2.9084 in)(6) Bore in the bearings for the rack: Bearing at the rear ... 12.746 0.045 mm (.5018 .0018 in)Bearing at the front ... 12.767 0.058 mm (.5026 .0023 in)Diameter of fuel rack ... 12.662 0.005 mm (.4985 .0002 in)(7) Bore in bearings for the camshaft: Front ... 55.090 0.039 mm (2.1689 .0015 in)Rear ... 68.339 0.039 mm (2.6905 .0015 in)Camshaft bearing surface (journal) diameter:Front ... 55.000 0.013 mm (2.1654 .0005 in)Rear ... 68.250 0.013 mm (2.6870 .0005 in) (8) Distance from housing to end of rack when rack and gears are engaged at center of fourth tooth position ... 7.24 0.08 mm (.285 .003 in)(9) Tighten plugs to a torque of ... 5 1 N (1.1 .2 lb)