CYLINDER PACK AS 10R9224 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Snap-On S6176 Socket 1
Illustration 1 g03385336
Typical example
Remove bolts (2) from clips (3) for the harness assembly.
Use Tooling (A) in order to remove Nitrogen Oxide (NOx) sensor (1) from the Original Equipment Manufacturer (OEM) tube assembly.
Illustration 2 g03385334
Typical example
If necessary, follow Step 2.c thorough Step 3.d in order to remove NOx sensor control module (6) from bracket (7).
Cut cable straps (8) from the harness assembly. Note: Ensure that all cable straps are removed for the harness assembly.
Disconnect the harness assembly from connection (4) on NOx sensor control module (6).
Remove bolts (5) from NOx sensor control module (6).
Remove NOx sensor control module (6) from bracket (7). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Snap-On S6176 Socket 1
B - Bostik Pure Nickel
Anti-Seize Compound 1
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Illustration 3 g03385334
Typical example
If necessary, follow Step 2.c thorough Step 3.d in order to install NOx sensor control module (6) to bracket (7).
Position NOx sensor control module (6) onto bracket (7).
Install bolts (5) to NOx sensor control module (6). Tighten the bolts to a torque of 10 N m (89 lb in).
Install new cable straps (8) to the harness assembly. Note: Ensure that all cable straps meet OEM specification.
Connect the harness assembly to connection (4) on NOx sensor control module (6).
Illustration 4 g03385336
Typical example
Lightly lubricate the threads of NOx sensor (1) with Tooling (B).
Use Tooling (A) to install NOx sensor (1) to the OEM tube assembly. Tighten the NOx sensor to a torque of 50 N m (37 lb ft).
Position clips (3) for the harness assembly.
Install bolts (2) to clips (3). Tighten the bolts to a torque of 28 N m (248 lb in).