CYLINDER GP-TILT 1116245 - Caterpillar

Re-Refined Base Stock Oils
Re-refined base stock oils are acceptable for use in Caterpillar engines and machines if these oils meet the performance requirements specified by Caterpillar for a particular compartment. Re-refined oils can be used exclusively in a finished oil or in combustion with new base stocks. The US Military and other heavy equipment manufacturers have also accepted the use of re-refined base stock oils with the same criteria.The re-refining process should be adequate to remove all wear metals and oil additives that were present in the used oil. This type of re-refining is generally accomplished by vacuum distillation and hydrotreating the used oil. Filtering alone is inadequate for producing a high quality re-refined base stock from used oil.After-Market Oil Additives
Caterpillar does NOT recommend the use of after-market oil additives. After-market oil additives are not necessary to achieve life predictions or to achieve rated performance. Fully formulated finished oils are made up of base stocks and commercial additive packages. These additive packages are blended into the base stocks at precise percentages to provide finished oils with performance characteristics that meet lubricant industry standards.Lubricant industry standard tests do not exist to evaluate the performance of after-market oil additives. There are also no lubricant industry standard tests to evaluate the compatibility of these after-market additives in a finished oil. After-market additives could be incompatible with the finished oil additive package, and lower the performance of the finished oil. The after-market additive could fail to mix with the finished oil, and produce a sludge in the crankcase. Caterpillar discourages the use of after-market additives in finished oils.To achieve all the performance that was built into a Caterpillar engine, follow these guidelines:* Select the proper Caterpillar oil or commercial oil that meets the compartment specifications.* Select the proper oil viscosity based on the Engine Oil Viscosity Chart in this manual.* Service the engine at the specified interval with new oil and oil filter.* Perform maintenance at the intervals specified in this manual.Caterpillar Transmission/Drive Train Oil (TDTO) (TO-4)
Caterpillar TDTO TO-4 is balanced to give maximum frictional material life in power shift transmissions. TO-4 oil specifications include frictional and gear wear requirements. TO-4 oil is offered in several viscosity grades, including SAE 50, for maximum component life at high ambient temperatures and heavy duty cycles.
TO-4 is formulated for transmissions and drive trains only. Using TO-4 in an engine would result in shortened engine life.Do not use engine oils for lubricating transmissions or drive trains. Failure to follow this recommendation can cause shortened transmission life due to material incompatibility and inadequate frictional requirements for disk materials.
Caterpillar does not currently offer multi-grade oils for use in transmissions. Multi-grade oils which use high molecular weight polymers as viscosity index improvers lose their viscosity effectiveness (permanent and temporary shear), and are therefore not recommended for transmission and drive train compartments. The Caterpillar TO-4 specification includes a test for multi-grade oil shear stability: oils that meet this specification may be available in the future.Transmission Lubricant Viscosity Recommendation
The following table