CYLINDER GP-AIR 1131824 - Caterpillar

Removal Procedure
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Cylinders equipped with lock valves can remain pressurized for very long periods of time, even with the hoses removed.Failure to relieve pressure before removing a lock valve or disassembling a cylinder can result in personal injury or death.Ensure all pressure is relieved before removing a lock valve or disassembling a cylinder.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide"for tools and supplies to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations.
Illustration 1 g01986073
Remove bolt (1) and disconnect hose assemblies (2) from leveling blade cylinder (3).
Illustration 2 g01986075
Remove bolt (4) and remove leveling blade cylinder (3) from leveling blade (5). Installation Procedure
Install leveling blade cylinder (3) in the reverse order of removal.
Tighten bolt (4) to a torque of 400 50 N m (295 37 lb ft).
Tighten bolt (1) to a torque of 400 50 N m (295 37 lb ft).