1154161 CYLINDER HEAD AS Caterpillar parts
918F, IT18F
Rating:
Alternative (cross code) number:
CA1154161
115-4161
1154161
CA1154161
115-4161
1154161
Weight: 96 pounds 43 kg.
INTEGRATED TOOLCARRIER, WHEEL LOADER,
Compare Prices:
As an associate, we earn commssions on qualifying purchases through the links below
$68.03
24 Aug 2023
US: KT_Motors
KT 1.25" 5x4.5 Hubcentric Wheel Spacers Fits GT500 SVT GT V6 (Silver)
KT Part Number: 5-wheel, -5x4, 115416--1. Please check the fitment before shopping or tell us your car's VIN # to confirm the fitment || Placement on Vehicle: Front Rear Left Right. Direct replacement for proper Fit and easy installation || Premium Quality & Durability: Crafted from high-strength alloy, our Wheel Hub & Bearing is precisely engineered to withstand constant stress and wear, making it perfect for high-mileage vehicles and rugged use || Noise Reduction Technology: Our Wheel Hub & Bearing's advanced design significantly reduces annoying road noise. Its sealed structure prevents dust and debris from causing unwanted noise and discomfort || Improved Fuel Efficiency: Our Wheel Hub & Bearing promotes better fuel efficiency due to precision-crafted bearings that minimize friction, allowing you to drive more and fill up less
KT Part Number: 5-wheel, -5x4, 115416--1. Please check the fitment before shopping or tell us your car's VIN # to confirm the fitment || Placement on Vehicle: Front Rear Left Right. Direct replacement for proper Fit and easy installation || Premium Quality & Durability: Crafted from high-strength alloy, our Wheel Hub & Bearing is precisely engineered to withstand constant stress and wear, making it perfect for high-mileage vehicles and rugged use || Noise Reduction Technology: Our Wheel Hub & Bearing's advanced design significantly reduces annoying road noise. Its sealed structure prevents dust and debris from causing unwanted noise and discomfort || Improved Fuel Efficiency: Our Wheel Hub & Bearing promotes better fuel efficiency due to precision-crafted bearings that minimize friction, allowing you to drive more and fill up less
Number on catalog scheme:
For full view, you need register
Caterpillar SIS machinery equipment:
Caterpillar SIS
IT18F INTEGRATED TOOLCARRIER 6ZF00001-UP (MACHINE) POWERED BY 3114 ENGINE »
115-4161
CYLINDER HEAD AS
918F WHEEL LOADER 3TJ00001-UP (MACHINE) POWERED BY 3114 ENGINE »
115-4161
CYLINDER HEAD AS
918F WHEEL LOADER 2CK00001-UP (MACHINE) POWERED BY 3114 ENGINE »
115-4161
CYLINDER HEAD AS
IT18F INTEGRATED TOOL CARRIER 5EJ00001-UP (MACHINE) POWERED BY 3114 ENGINE »
115-4161
CYLINDER HEAD AS
Information:
Removal Procedure
Start By:
Remove the Alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01249049
Use a suitable tool in order to prevent the crankshaft from rotating. Remove bolts (1).
Remove thrust block (2).
Carefully remove the assembly of the crankshaft pulley from the crankshaft.
Follow Steps 4.a through 4.b in order to disassemble the crankshaft pulley.
Remove bolts (5).
Remove crankshaft pulley (4) from crankshaft adapter (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the crankshaft adapter, the pulley and the thrust block are clean and free from damage. Replace any components that are damaged. It is possible to reclaim a crankshaft adapter with a worn seal surface by installing a wear sleeve. Refer to Disassembly and Assembly, "Crankshaft Wear Sleeve (Front) - Remove and Install".
Illustration 2 g01367385
If necessary, follow Steps 2.a through 2.b in order to assemble the crankshaft pulley.
Install crankshaft pulley (4) to crankshaft adapter (3).
Install bolts (5) to the assembly of the crankshaft pulley, and the crankshaft adapter. The bolts should be evenly spaced.
Tighten the bolts to a torque of 78 N m (58 lb ft).
Ensure that the front of the crankshaft is clean and free from damage. Install the assembly of the crankshaft pulley to the crankshaft.
Illustration 3 g01390496
Align the holes in thrust block (2) with the holes in the crankshaft. Note: Ensure chamfered holes (X) in thrust block (2). Face toward the front of the engine.
Install thrust block (2) to the assembly of the crankshaft pulley.
Install bolts (1) to thrust block (2).
Use a suitable tool in order to prevent the crankshaft from rotating. Tighten the bolts evenly to a torque of 115 N m (85 lb ft).
Repeat Step 7 one more times in order to ensure correct torque. End By:
Install the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install".
Start By:
Remove the Alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01249049
Use a suitable tool in order to prevent the crankshaft from rotating. Remove bolts (1).
Remove thrust block (2).
Carefully remove the assembly of the crankshaft pulley from the crankshaft.
Follow Steps 4.a through 4.b in order to disassemble the crankshaft pulley.
Remove bolts (5).
Remove crankshaft pulley (4) from crankshaft adapter (3). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the crankshaft adapter, the pulley and the thrust block are clean and free from damage. Replace any components that are damaged. It is possible to reclaim a crankshaft adapter with a worn seal surface by installing a wear sleeve. Refer to Disassembly and Assembly, "Crankshaft Wear Sleeve (Front) - Remove and Install".
Illustration 2 g01367385
If necessary, follow Steps 2.a through 2.b in order to assemble the crankshaft pulley.
Install crankshaft pulley (4) to crankshaft adapter (3).
Install bolts (5) to the assembly of the crankshaft pulley, and the crankshaft adapter. The bolts should be evenly spaced.
Tighten the bolts to a torque of 78 N m (58 lb ft).
Ensure that the front of the crankshaft is clean and free from damage. Install the assembly of the crankshaft pulley to the crankshaft.
Illustration 3 g01390496
Align the holes in thrust block (2) with the holes in the crankshaft. Note: Ensure chamfered holes (X) in thrust block (2). Face toward the front of the engine.
Install thrust block (2) to the assembly of the crankshaft pulley.
Install bolts (1) to thrust block (2).
Use a suitable tool in order to prevent the crankshaft from rotating. Tighten the bolts evenly to a torque of 115 N m (85 lb ft).
Repeat Step 7 one more times in order to ensure correct torque. End By:
Install the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install".
Parts cylinder Caterpillar catalog:
9C3826
CYLINDER & SEAL GP
918F, 924F
918F, 924F
918F, 924F
9C3827
CYLINDER & SEAL GP
918F, 924F
918F, 924F
918F, 924F
7E4212
CYLINDER HEAD GP
918F, IT18F, RT100
918F, IT18F, RT100
6E1114
CYLINDER GP-PIN COUPLER
IT18F, IT24F, IT28F, IT28G, IT62G
IT18F, IT24F, IT28F, IT28G, IT62G
9C9460
CYLINDER & MOUNTING GP-COUPLER
IT18F, IT24F, IT28F
IT18F, IT24F, IT28F
1077591
CYLINDER HEAD AS
3114, 918F, IT18F, RT100
3114, 918F, IT18F, RT100
918F, 924F
9T8823
CYLINDER GP-PIN COUPLER
416C, 426C, 428C, 436C, 438C, 914G, IT14G, IT14G2, IT18F, IT24F, IT28F, IT28G
416C, 426C, 428C, 436C, 438C, 914G, IT14G, IT14G2, IT18F, IT24F, IT28F, IT28G
1007023
CYLINDER AS
IT18F, IT24F, IT28F
IT18F, IT24F, IT28F
9T3938
CYLINDER AS
918F, 924F, CB-434B, CB-535B
918F, 924F, CB-434B, CB-535B
6C6085
CYLINDER GP
320 L
320 L
320 L
9T8823
CYLINDER GP-PIN COUPLER
416C, 426C, 428C, 436C, 438C, 914G, IT14G, IT14G2, IT18F, IT24F, IT28F, IT28G
416C, 426C, 428C, 436C, 438C, 914G, IT14G, IT14G2, IT18F, IT24F, IT28F, IT28G