CYLINDER GP-STICK 1251546 - Caterpillar

Clutch Leakage Check
Table 13
Clutch Leakage Check Input Speed (2100 10 rpm)
Input Flow 178 4 L/min (47 1 US gpm)(1)
Arrangement FIRST, THIRD, & FOURTH SECOND & all other gears Each Gear
230-6321
262-4313 1.14 L/min (0.3 US gpm) 7.6 L/min (2 US gpm) -
262-4312 - - 60 L/min (15.8 US gpm) Max
230-6311(2) 2.3 L/min (0.6 US gpm) 5.3 1.5 L/min (1.4 0.4 US gpm) -
(1) Input Flow 155 4 L/min (41 1 US gpm) for serial numbers A8J, MHG, KZL, and JMS 4000-up
(2) Serial numbers 1-3999 that have had the power optimization package performed (Reference: Custom Service Information, REHS3285) will now have the specs for arrangement number 262-4312. Arrangements that have not will remain as listed above.
Table 14
Clutch Leakage Check Input Speed (2100 10 rpm)
Input Flow 178 4 L/min (47 1 US gpm)(1)
Gear Range 1F 2F 3F 4F 1R 2R 3R 4R N
Input Flow ______ ______ ______ ______ ______ ______ ______ ______ ______
Lube Flow ______ ______ ______ ______ ______ ______ ______ ______ ______
Leakage ______ ______ ______ ______ ______ ______ ______ ______ ______
Averages 1F+3F+4F/3=_____________ 1R+3R+4R/3=_____________
(1) Input Flow 155 4 L/min (41 1 US gpm) for serial numbers A8J, MHG, KZL, and JMS 4000-upSpeed Sensor Test
Table 15
Speed Sensor Number of Teeth Speed (rpm) at Sensor Frequency Minimum Peak to Peak Voltage Maximum Peak to Peak Voltage
Output 34 121 68.5 hz 4 V 24 V
Table 16
Speed Sensor Test Input Rotation (700 10 rpm)
Gear Range FORWARD 1
Output Sensor 1 (B) _______Volts/Vrms
Output Sensor 2 (A) _______Volts/Vrms Contamination Control
Table 17
ISO Particle Count Sample the test bench oil supply.
*ISO 4406 ________/________Particle Count
Table 18
______________________________________
Technician
______________________________________
Supervisor