CYLINDER GP-BOOM 1283203 - Caterpillar

Illustration 1 g02639681
Rear of Tractor (1) Auger cylinder (2) Screed lift cylinderEach side of the tractor is equipped with auger cylinder (1) and screed lift cylinder (2). The auger cylinders are used to raise or lower the augers. The screed lift cylinders are used when the screed is lifted or when the screed counterbalance system is operating.
Illustration 2 g02639682
Left Side of Machine (3) Tow point cylinderTow point cylinder (3) is located on each side of the machine.The tow point cylinders raise and lower the tow point. When the tow point on the screed is changed, the angle of attack on the screed is also changed.
Illustration 3 g02639683
Left Side of Machine (4) Hopper cylinderEach side of the machine is equipped with hopper cylinder (4) .The hopper cylinders raise and lower the hopper wings.
Illustration 4 g02639686
Front of Machine (5) Apron (6) Apron cylindersApron cylinders (6), if equipped, are located in the font of the machine under apron (5). Excess paving material on the apron is directed onto the drag conveyors when the apron cylinders (6) are extended.
Illustration 5 g02639696
The front of the tractor is equipped with push rollers (7). The push rollers contact the rear wheels of a truck. These rollers allow the tractor to push a truck during the paving operation. The truck hitch cylinders, if equipped, are located inside housing (8) at the front of the machine. The truck hitch cylinders control the movement of truck hitch rollers (9).