CYLINDER HEAD GP 1306764 - Caterpillar

Illustration 1 g06133953
Press the "+" button.
Select if you want the new truck before or after the current truck.
Illustration 2 g06127484
Press the "Before" or "After" button.
Select buttons to edit each property of the new truck.
Illustration 3 g06133915
Enter the name that is desired to be shown on the display and stored.
Enter the ID of the new truck.
Enter the target weight of the new truck.
Select the "OK" button.
Illustration 4 g06133985
Select the "Save" button to program the list to the ECM.
Select if you would like to save the changes or not.
Illustration 5 g06133997
Press "OK" to save the changes.
Press "Back" to go back to the list.Removing a Truck from Truck List
Settings > Payload > List Management > Truck
Illustration 6 g06133953
Select the truck that you would like to remove.
Illustration 7 g06133979
Press "Delete".
Press "OK" to delete the selected truck.Material List
Adding a Material to Material List
Settings > Payload > List Management > Material
Illustration 8 g06134110
Select the material that you would like to add a new material above or below.
Press the "+" button.
Select if you want the new material before or after the current material.
Illustration 9 g06127767
Press "Before" or "After".
Select buttons to edit each property of the new material.
Illustration 10 g06134020
Enter the name that is desired to be shown on the display and stored.
Enter the ID of the new material.
Enter the density of the new material.
Select the "OK" button.
Illustration 11 g06134144
Select the "Save" button to program the list to the ECM.
Select if you would like to save the changes or not.
Press "OK" to save the changes.
Press "Back" to go back to the list.Removing a Material from Material List
Settings > Payload > List Management > Material
Illustration 12 g06134110
Select the material that you would like to remove.
Illustration 13 g06127777
Press "Delete".
Press "OK" to delete the selected material.