1334281 CYLINDER BLOCK GP Caterpillar parts
3412E
Rating:
Alternative (cross code) number:
CA1334281
133-4281
1334281
CA1334281
133-4281
1334281
INDUSTRIAL ENGINE,
Compatible equipment models: 1334281:
Number on catalog scheme:
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Remove the piston cooling jets. Refer to Disassembly and Assembly, "Piston Cooling Jets - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01126088
Turn the crankshaft until the connecting rod caps are at the bottom center.
Place a identification mark on the connecting rod and connecting rod cap (2). The number should match the cylinder number.
Remove bolts (1) and connecting rod cap (2).
Illustration 2 g01126089
Remove the lower half of connecting rod bearing (4) from connecting rod cap (2).
Push the piston and the connecting rod away from the crankshaft. Remove the upper half of connecting rod bearing (4) from connecting rod (3).
Remove the piston and connecting rod (3) from the cylinder block.
Start By:
Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
Remove the piston cooling jets. Refer to Disassembly and Assembly, "Piston Cooling Jets - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01126088
Turn the crankshaft until the connecting rod caps are at the bottom center.
Place a identification mark on the connecting rod and connecting rod cap (2). The number should match the cylinder number.
Remove bolts (1) and connecting rod cap (2).
Illustration 2 g01126089
Remove the lower half of connecting rod bearing (4) from connecting rod cap (2).
Push the piston and the connecting rod away from the crankshaft. Remove the upper half of connecting rod bearing (4) from connecting rod (3).
Remove the piston and connecting rod (3) from the cylinder block.
Caterpillar SIS machinery equipment:
Caterpillar parts catalog:
Parts cylinder Caterpillar catalog:
24H, 3412, 3412C, 3412E, 651E, 657E, 772B, 773B, 773D, 775B, 775D, 990, 990 II, 992C, 992D, D10N, D10R, D9L, PR-1000, PR-750B
7E3762
CYLINDER BLOCK GP
3412, 3412C, 3412E, PM3412, SCT673, SPS342, SPT342
3412, 3412C, 3412E, PM3412, SCT673, SPS342, SPT342
3412, 3412C, 3412E, 5110B, 651E, 657E, 772B, 990, 992D, D10N, PR-750B
1430046
CYLINDER HEAD AS
24H, 3412, 3412C, 3412D, 3412E, 5110B, 651E, 657E, 773B, 773D, 773E, 775B, 775D, 775E, 844, 990, 990 II, 992C, 992D, C30, C32, D10N, D10R, D9L, PM3412, PR-1000, SCT673, SPS342, SPT342
24H, 3412, 3412C, 3412D, 3412E, 5110B, 651E, 657E, 773B, 773D, 773E, 775B, 775D, 775E, 844, 990, 990 II, 992C, 992D, C30, C32, D10N, D10R, D9L, PM3412, PR-1000, SCT673, SPS342, SPT342
1291674
CYLINDER HEAD GP
3412E
3412E
4P7230
CYLINDER BLOCK GP
3412, 3412C, 3412E, PM3412, SCT673, SPS342, SPT342
3412, 3412C, 3412E, PM3412, SCT673, SPS342, SPT342
2657301
CYLINDER HEAD GP
3412E
3412E
3412, 3412C, 3412D, 3412E, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3606, 3608, 3612, 3616, 3618, 5230, 5230B, 776C, 776D, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789B, 789C, 793B,...
3117557
CYLINDER HEAD GP
G3412, G3412C
G3412, G3412C
2168340
CYLINDER HEAD GP
G3412, G3412C
G3412, G3412C
2039169
CYLINDER HEAD GP
G3412C
G3412C
1247372
CYLINDER HEAD GP
G3412C
G3412C
1247371
CYLINDER HEAD GP
G3412C
G3412C
2880475
CYLINDER HEAD AS
G3412, G3412C
G3412, G3412C
1183969
CYLINDER & LINES GP-BUCKET
318B, 320B, 322B L, 325B L, 330B L, 345B L
318B, 320B, 322B L, 325B L, 330B L, 345B L
2509978
CYLINDER HEAD GP
3412E
3412E
2503410
CYLINDER HEAD GP
3412E
3412E