CYLINDER & SEAL GP-BUCKET 1336806 - Caterpillar

Illustration 11 g00683108
Attach Tooling (C) and a suitable lifting device to intermediate differential housing (12). Remove screws (11). Remove intermediate differential housing (12). The weight of intermediate differential housing (12) is approximately 34.0 kg (75 lb).
Illustration 12 g00683109
Remove bolt (13), lock (14), and adjustment spanner nut (15) from intermediate differential housing (12) .
Illustration 13 g00683111
Remove bearing race (16) from the intermediate differential housing (12) .
Illustration 14 g00683112
(S/N: 7ZM1-5998ZM1-4999WM1-12981WN1-898)
Remove breather (17) and brake bleeder (18) from intermediate differential housing (12) .Note: Breather (17) will be replaced by a bushing and a fitting in machines that are effective with serial numbers (S/N: 7ZM600-UP8ZM500-UP9WM1299-UP1WN899-UP).
Illustration 15 g00683113
Use a suitable lifting device in order to remove bevel gear assembly (19) from the differential housing. The weight of bevel gear assembly (19) is approximately 27.2 kg (60 lb).
Illustration 16 g00683114
Remove bearing race (20) from the differential housing.
Illustration 17 g00683115
Remove bolts (21) from the bevel gear housing.
Illustration 18 g00683118
Use a press to separate bevel gear (22) from the differential case.
Illustration 19 g00683120
Remove thrust washer (25) and gear (24) from differential case (23) .
Illustration 20 g00683121
Remove dowel pins (26) from the differential case.
Illustration 21 g00683122
Remove three pinion shafts (27) from differential case (23).
Illustration 22 g00683123
Remove thrust washers (28), pinion gears (29), and spider gear carrier (30) from the differential case.
Illustration 23 g00683124
Remove differential gear (32) and thrust washer (31) from the differential case.
Illustration 24 g00683126
Install Tooling (D) and remove bearing (33) .
Illustration 25 g00683127
Install Tooling (D) and remove bearing (34) from bevel gear (22) .