CYLINDER BLOCK GP 1337091 - Caterpillar

g01370904
Do not operate or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals. Failure to follow the instructions or heed the warnings could result in serious injury or death.
Automatic Starting (2)This safety message for automatic starting is located on both sides of the generator, on the rear panel, and on both sides of the enclosure.
g01392484
When the engine is in the AUTOMATIC mode, the engine can start at any moment. To avoid personal injury, always remain clear of the the engine when the engine is in the AUTOMATIC mode.
Electrocution (3)
The safety message for electrocution is located on both sides of the generator and on the rear panel.
g01392482
Do not connect the generator to a utility electrical distribution system unless it is isolated from the system. Electrical feedback into the distribution system can occur and could cause personal injury or death.Open and secure the main distribution switch, or if the connection is permanent, install a double throw switch to prevent electrical feedback. Some generators are specifically approved by a utility to run in parallel with the distribution system and isolation may not be required. Always check with your utility for the applicable circumstances.
Electrical Shock (4)The safety message for electrical shock is located on the back of the rear panel, and on the rear panel.
g01372247
! Shock/Electrocution Hazard! Read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.
Hot Fluid Under Pressure (5)The safety message about hot fluid under pressure is located on the front panel of the radiator and on the expansion tank.
g01371640
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Hot Surface (6)This safety message for hot surfaces is located on the top of the enclosure group, on both sides of the radiator, and on both sides of the enclosure.
g01384734
Hot surface! Do not touch!
Crush Falling Object (7)The safety message concerning falling objects is located on both side panels of the generator enclosure.
g01433231
Crushing hazard! Read and understand the instructions and warnings in the Operation and Maintenance manual. Failure to follow the instructions or heed the warnings could cause serious injury or death.