CYLINDER AS 1354688 - Caterpillar

Illustration 7 g01155678
Remove port plate (22) and bearing cup (23) .
Illustration 8 g01155679
Remove bearing cone (24) .
Illustration 9 g01155680
Remove rotating group (25) .
Illustration 10 g01155681
Remove pistons (26) and retainer (27) .
Illustration 11 g01155682
Remove bearing (28) .
Illustration 12 g01155683
Remove pins (29) .
Illustration 13 g01155684
Illustration 14 g01155691
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use a suitable press in order to remove retaining ring (30) .
Remove washer (31), spring (32), and washer (33) .
Illustration 15 g01155692
Remove shaft (34) and O-ring seal (36) .
Illustration 16 g01155693
Compress spring (36). Position piston (37), as shown.
Remove swashplate (38) .
Illustration 17 g01155694
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Remove retaining ring (39), pin (40), spring (36), and piston (37) from swashplate (38) .
Illustration 18 g01155696
Remove bearings (41) and bearing cone (42) .
Illustration 19 g01155697
Use Tooling (A) in order to remove retaining ring (43) .
Remove lip seal (44) and bearing cup (45) .