CYLINDER BLOCK GP 1360245 - Caterpillar

Table 1
Unit Injector Pump     Base Pump Group     Reman    
162-9608     162-9610     N/A    
107-1228     109-4327     0R-4969    
134-0467     135-5459     0R-9439    
186-3410     186-3412     N/A    162-9608 Unit Injector Hydraulic Pump Gp
Illustration 1 g01224288
(1) Unit Injector Hydraulic Pump (2) Tighten the bolt that holds the gear to the following torque. ... 108.8 13.6 N m (80 10 lb ft) (3) The high pressure relief valve is set to the following pressure. ... 32.2 1.7 MPa (4670 247 psi)
Illustration 2 g01224291
(4) Tighten the fitting for the oil inlet port to the following torque. ... 71.5 7.5 N m (52.7 5.5 lb ft) (5) Tighten the plug to the following torque. ... 6.0 0.7 N m (53 6 lb in) (6) Tighten the plug to the following torque. ... 10.75 1.25 N m (95 11 lb in) (7) Tighten the valve to the following torque. ... 50 5 N m (37 4 lb ft) (8) Tighten the fitting for the oil outlet port to the following torque. ... 23 2 N m (17.0 1.5 lb ft) (9) Orient the open face of the nut away from the pump. Tighten the nut to the following torque. ... 5.5 1.5 N m (49 13 lb in)
Illustration 3 g01224294
(10) Tighten the fitting for the fuel inlet port to the following torque. ... 17.5 2 N