CYLINDER AS 1412917 - Caterpillar

Removal Procedure (Transmission Output Speed Sensor)
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01845075
Disconnect harness assembly (1). Remove bolt (2) and the retainer . Remove speed sensor (3). Repeat this step for the remaining speed sensor.
Illustration 2 g01845082
Remove O-ring seal (4). Repeat this step for the remaining speed sensor. Removal Procedure (Torque Converter Output Speed Sensor)
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 3 g01845157
Disconnect harness assembly (1). Remove bolt (2) and the retainer.
Illustration 4 g01845181
Remove O-ring seal (4). Repeat this step for the remaining speed sensor. Removal Procedure (Engine Output Speed Sensor)
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 5 g01845093
Illustration 6 g01845113
Disconnect harness assembly (1). Remove speed sensor (2) and O-ring seal (3).