CYLINDER GP-STEERING 1415854 - Caterpillar

Illustration 1 g02511696
Table 1
Specification for 328-3549 Screed Plate and Heater Gp    
Item     Qty     Part     Specification Description    
1     44     8T-4195 Bolt     Apply Loctite 272 to the threads of the bolts.    
2     8     288-1190 Screw     Torque to
115 20 N m (85 15 lb ft).    
3     12     6V-8801 Nut     Apply Loctite 272 to the threads of the nuts.    
4     2     349-3020 Heater As     Before you install the screed plate, apply
10 mm (0.4 inch) wide and
5 mm (0.2 inch) thick bead of 257-8023 Thermal Grease to bottom of the heater assemblies.    
5     2     349-3019 Heater As     Before you install the screed plate, apply
10 mm (0.4 inch) wide and
5 mm (0.2 inch) thick bead of 257-8023 Thermal Grease to bottom of the heater assemblies.    
6     8     3K-2889 Locknut     Assemble the locknuts until 1 to 3 of the bolts thread is protruding through locknuts.    
7     2     336-2012 Temperature Sensor Gp     Before you install the screed plate, apply 257-8023 Thermal Grease to the temperature sensor groups.
Apply Loctite 272 to the threads of the temperature sensor groups.
Torque to
30 3 N m (266 27 lb in).